Specifications

Introduction • Super II 6
Prompting Macros
The scale’s display can prompt a user through a series of steps for repetitive tasks. The macros are easily
written using this manual and the Super II controller. They can consist of up to 100 individual steps and
can be written in some foreign languages or industry jargon, if desired. The macros help to simplify scale
operation for novice or untrained operators by providing one-button operation.
Programmable Accuracy and Sample Size
This feature permits the programmer to make a trade-off between the sample size that is hand counted
onto the scale and the accuracy that the scale can potentially deliver. The higher the accuracy setting
selected, the larger the sample weight required. If the parts are small, a high accuracy setting can mean
that the scale will prompt an operator to hand count very large samples onto the scale. Hand counting
large samples can, in itself, introduce operator errors as well as slow down the scale counting process.
Hand counting very small samples (fewer than 5 pieces) may produce errors, since the average piece
weight may not be representative of the entire population of parts. The programmer uses these settings
to minimize errors introduced by nonuniform parts, hand counting or insufficient sample weight.
Programmable Units of Measure
A preprogrammed list of weighing units is available in the User Menu. This feature allows the programmer
to make several units available to the user, or only one unit if one is less likely to create confusion. Custom-
ized weighing units for special applications can be programmed and can be easily accessed by the user
when needed
.
Setra Dialog Language (SDL) (New in Software Ver 3.01)
Setups, database records and transaction logs can be saved and restored using the Setra dialogue lan-
guage.
A brief synopsis of the programming functions as they appear in the menu selections are listed below:
Supervisor Menu:
PRINT Program the interval print time period as well as the print formats for the 10 print
SETUP registers.
SAMPLE Program the minimum sample size, the sample size selections and to include a
SETUP sample size selection menu as part of your default operation.
ACCURCY Program the minimum scale performance accuracy based on the sample weight.
SETUP
PORTS Program the baud rate and parity characteristics of the three serial ports.
SETUP
TIME Program the time and date and their reporting formats on power-up and when
DATE printing.
UNITS Select the availability of the various weighing units of measure as well as
ENABLED program the user definable unit of measure.
DATBASE Select the Database fields for display, print the databases, and set the database
SETUP record protection.