Specifications

6
EXPERIMENTATION
1. Display test
When your balance is first powered on (connected to an AC outlet or battery),
it automatically runs through a “display test,” showing all possible segments
which might be displayed. This test lasts approximately six seconds. The
balance next says “HELLO” and performs self-diagnostics to ensure proper
operation. The balance then counts down to zero, and is ready for use.
2. Trying your balance
It is important that you read this User’s Guide thoroughly to ensure proper use
of your balance. Nonetheless, experimenting with your balance and its key-
board prior to reading this guide in its entirety will not harm your balance, and
may actually give you a better understanding of the instructions in this guide.
If you instruct the balance to do something it is not capable of doing, the balance
will simply respond by displaying “UnAbLE”. To continue experimenting, press
the clear key.