Specifications

28
 Select the correct device from the list of IP Addresses and click OK.
The Setup button displays the Logger Network Setup dialog box where network address information is
entered. See your network administrator before making changes.
When you select the Use DHCP checkbox the Dynamic Host Configuration Protocol is used to populate
the IP Address, Subnet Mask, and Gateway Address fields automatically.
NOTE: Each meter connected to the network requires its own unique network IP address. An address is
provided automatically if the network allows DHCP (Dynamic Host Configuration Protocol) and the
meter is configured to request an address.
 Click Update Logger after making your selections.
HeadStart displays the following message when the connection is successful.
DID YOU KNOW? Setra Systems uses
well-known and registered port
numbers for BACnet (47808) and
Modbus (502) assigned by the IANA
(Internet Assigned Numbers
Authority).