Specifications

40
Read/Write Registers—Read/Set Objects
The Read/Write Registers screen provides diagnostic and special configuration
options, allowing the changing or viewing of the value of any Power Patrol
register. Its use is not required for a basic setup.
1) Enter a register address. Refer to the Appendices, All Things Modbus or
BACnet Objects for a list of registers and their descriptions.
-or-
Click List to select a register from the Register Picker dialog box.
Use the Register Picker dialog box to search for registers/objects by name.
The selected value is entered on the Read/Write Registers—Read/Set
Objects screen.
2) Click Read to see the current value.
3) Enter a new value in the New Value field.
4) Click Write to change to the new value.
5) Click Clear Totals to clear accumulated data.
DID YOU KNOW? Accumulated data is
registers/objects with a time
reference, such as time since reset,
kWh, demands, etc.