User's Manual



24

the specified blacklist, and displaying the current list status. Enter the
correctSSIDnumbertoaddtheblack/whitelist;entertheserialnumber
ofAPtodeletethespecifiedwhite/blacklist;enter0todeleteall(TheAP
serialnumbercanviewedbydisplayingthecurrentliststatus).


Figure7‐12Configureblacklistandwhitelist
Note:whenthedeviceisconnectedtoaWi‐Finetwork,theconnected
Wi‐Fi icon
 will display in the status bar and shows you the signal
strength(indicatedbythenumberofbandsthatlightup).Ifyoutouch
theWi‐Finetworkthatiscurrentlyconnectedtothedevice,itsname,
status,speed,signalstrength,securityinformation, andIPaddress will
bedisplayed.
Ifyouwanttoremovethewirelessnetworksettingsonyourdevice,
touchandholdtheconnectedAP,andthenselecttoforgetnetworkand
deletethisAP,asshowninthefigure: