WARRANTY REGISTRATION 4 REGISTER FOR EXTRA BENEFITS 5 16 " Activate within 30 days of purchase: seura.
Compatible with Séura Outdoor TVs: Shade Series: SHD1-55, SHD1-65, SHD1-75, SHD2-43, SHD2-55, SHD2-65, SHD2-75 Ultra Bright: STM3-55-U, STM3-65-U, STM3-86-U Safety Prior to the installation of this product, read all instructions. Keep this manual for future reference. This product is designed to mount Seura outdoor televisions and accessories weighing up to 200 lbs. to a concrete pad or engineered wooden structure. CAUTION DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY.
Installation Tools The following tools may be required depending upon your particular Parts and Tools Required (not included) 1/2” The following tools may be required depending on your particular installation. They are not included.
Parts Included P5080T Before using the device, please check the following contents of theTools box for completeness. Illustrations are Installation not to scale. If any parts are missing or damaged, contact TheSéura. following tools may be required depending upon your particular installation. Electronic Stud Finder ¼˝ Drill Bit for Wood Stud Pencil Level /8 ˝ Concrete Drill 3 1 2 Tape Measure WARRANTY REGISTRATION REGISTER FOR EXTRA BENEFITS Activate within 30 days of purchase: seura.
P5080T Installation Tools Parts Included, Packaged as TW-5 The following tools may be required depending upon your particular installation. They are not inc Electronic Stud Finder ¼˝ Drill Bit for Wood Stud Pencil Level Protective Eyewear Socket Wrench /8 ˝ Concrete Drill Bit* 3 P5080T lation Tools Installation Tools owing tools may be required depending upon your particular installation. They are not included. The following tools may be required depending upon your particular installation.
Features Top Leveling Screws Tilt Locking Bolts Allows for tilt angle of the TV adjustment. Allows for leveling adjustments of the TV after mounting. Directional Mounting Arrows The arrow lets you know which edge is up. Bottom Locking Screws Prevents the TV from being removed or dislodged from the mounting plate. Floor Stand Mounting Plate Fasten to the floor via 4-6 screws.
Cable Pass Through Run power and content cables through the pole and connect to the TV inputs. Security Locking Screw Tighten this screw to prevent the swivel plate from being removed. Swivel Adjustment Loosening allows adjustment of the swivel. Always retighten as TV may swivel in the wind. Height Adjustment Use both included screws to set the desired height. Cable Pass Through Run power and content cables through the back of the pole or into the floor.
¼˝ Drill Bit for Electronic Stud Finder Wood Stud Step 1: Assemble and Prepare Mount 4 5 16 5 4 " " 16 1 /8 ˝ Concrete Drill Bit* Hand Held Drill 3 1 26 4" 26 4" 1. Attach mounting plate to floor stand Level plate to the floor Pencil Tape stand Measure rails as shown.
2. Adjust floor stand length/TV height Loosen the security torx screws with the included screwdriver. Adjust to the desired height of the stand. Tighten screws.
IMPORTANT: HANDLE THE TV IN A VERTICAL POSITION TO AVOID DAMAGE TO THE SCREEN. IF PLACING THE TV SCREEN-SIDE DOWN OR LEANING AGAINST A WALL DURING INSTALLATION, COVER THE SCREEN WITH A PROTECTIVE CLOTH OR BLANKET. Installation IMPORTANT: This product must be mounted to a uniform sub-structure such as poured concrete at least 4” thick or engineered decking with footings. Patio block, loose deck boards, split concrete or any substrate under 3” thick poses a hazard of falling.
2. Drill pilot holes Wood Joist Mounting: Pre-drill the marked holes on the floor 3-inches deep with a 7/32” drill bit. Concrete: Pre-drill the four marked holes on the floor at least 4-inches deep with a 7/16” masonry drill bit.
3. Attach floor mounting plate Align the mounting plate with the pre-drilled holes. Ensure that the cable pass through holes on the mount are positioned appropriately. M6 x 60mm Screws (Qty 2) Wall Plate (Qty 1) ecurity Barrel (Qty 1) Wood Joist Mounting: Attach mounting plate to the floor using the six lag screws and six flat washers. Do not over tighten the lag screws. Tighten the lag screws only until the washers are pulled firmly against the mounting Thread Depth Indicator Universal Washers plate.
Step 3: Attach Tilt Mount TV Brackets to TV IMPORTANT: Check your TV manual before attaching brackets to TV. Some models require attaching soundbar brackets in tandem with attaching TV brackets. Using a Philips #2 Screwdriver (or 6 mm Allen Wrench for 86” Ultra Bright TV), remove the four VESA mount screws from the back of the TV. Place the two identical Tilt Mount TV Brackets flat against the back of the TV with the arrows pointed towards the top of the TV.
Step 5: Adjust the TV Caution: It is possible to dislodge your TV while you level it. Use extreme caution until you tighten the leveling and locking screws. Top Leveling Screw Séura recommends checking knobs, screws, and bolts every two to six months. Temperature fluctuations, wind, and normal wear and tear can loosen hardware over time. Allows for leveling adjustments of the TV after mounting.
Tilt adjustment: Adjusting the TV Tilt Angle t Angle 1. Place one hand on the center-top edge edge ofof the flat the TV. 2. Place the other hand on the center- bottom edgeof of the TV. r-bottom edge 3. U sing the upper hand, gently pull the top of the TV towards you while the lower he tophand of the gently pushes the bottom of the TV wer hand away gently from you. l away from you. Tilt Locking Bolts Adjusting the TV to the Original Position 1.
Outdoor TV Mount Warranty The standard limited warranty policies of Séura, Inc. (“Séura”) shall apply to all equipment or other goods (“Products”) at the time of sale to any authorized Séura distributor and/or product reseller. These warranty policies may be modified by Séura from time to time. Copies of the standard limited warranties then in effect for a particular Product will be made available upon request and are also available on the Séura website at https://www.seura.com/warranty/.
be reasonably required by Séura to verify the Product’s warranty eligibility. Séura shall have no liability with respect to Products whose serial number has been removed, defaced, replaced, or otherwise tampered with in any manner. Séura reserves the right to examine all failed product components and determine, in its sole discretion, whether any product components are defective and covered under warranty. LIMITATION OF LIABILITY.
Specifications FLOOR STAND Model: FS-1 GENERAL DISPLAY COMPATIBILITY FLOOR STAND DIMENSIONS MOUNTING PLATE DIMENSIONS FINISH COLOR SHIPPING INSTALLATION DURABILITY MAXIMUM TV WEIGHT INSTALLATION SURFACE HARDWARE SHIPPING CONTAINER DIMS 42" - 86" Séura Outdoor TVs Collapsed: 26.25" w x 14" d x 39.75" h Extended: 26.25" w x 14" d x 61.
4 5 16 " 4 5 16 " 1 26 4" 1" 17 44" 14" 14" 15 16 "17 15 16 1 26 4" 1" 20 5 16" " 20 5 16" 44" 14" 14" 19
For technical support, please contact Séura at 1-800-957-3872 during regular business hours: M-F 8:00 am - 4:30 pm, Central Time. 1230 Ontario Road Green Bay, Wisconsin 54311 1-800-957-3872 contacts@seura.com www.seura.com Publish date: September 9, 2020 Information is subject to change without notice.
