Owner's Manual
8
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry cloth.
6. Do not block any of the ventilation openings. Install in
accordance with the manufacturer’s instructions.
7. Do not install near any heat sources such as radiators,
heat registers, stoves,or other apparatus (including
8. Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. When the
electrician for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
10.
manufacturer.
11. Use only with the cart, stand,
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
12. Unplug this apparatus during lightning
storms or when unused for long periods of time.
13.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
14.
the inside of this apparatus to rain or moisture. The
inside of this apparatus shall not be exposed to dripping
or splashing.
15. The apparatus shall not be exposed to dripping or
vases, shall be placed on the apparatus.
16. The apparatus shall be connected to a MAINS socket outlet
with a protective earthing connection. Where the MAINS
plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
17. The disconnect device shall remain readily operable.
18. The socket-outlet shall be installed near the equipment
and shall be easily accessible.
19. Inspect the desired location for installation and be aware
of all electrical wiring pathways, water pipes, gas lines, or
other potentially hazardous conditions that may exist to
protect from accidental damage during creation of on-site
conditions.
20.
and have been installed by the appropriate individuals and
are code approved.
21. Ensure all framing requirements, if needed, have been
completed to building code and pose no structural issues.
22. It is REQUIRED that this product is plugged into an
electrical outlet protected by a Ground Fault Circuit
and/or injury. Failure to do so will void any warranty for
this product.
23.
product. Removing covers can expose you to high voltage
and other dangerous conditions.
24. Do not overload AC outlets or extension cords. Overloading
25. Close adult supervision is necessary when any product is
used by or near children.
26. Do not operate any product with a damaged cord or plug
or operate it after the appliance malfunctions or has been
damaged in any manner.
27. To electrically disconnect the product, turn OFF the
product, then remove the electrical power plug from the
outlet.
28.
outdoors.
29. If you notice any smoke or scorched smell near the
personnel for service and/or repair.
30.
substances near the product.
31. Do not use this product for other than intended use.
32. This product is water resistant. Do not immerse this
product in water.
Important Safety Instructions