Owner's Manual

14
Step 2: Aach the soundbar mounting brackets to the TV
a. Lay the soundbar mounting brackets on the back
of the TV and soundbar. Use the shorter set of
soundbar mounting brackets for 50-inch and
smaller Séura TVs. Use the longer set of soundbar
mounting brackets for 55-inch and larger Séura
TVs. The VESA holes on the TV and holes on the
soundbar should line up with the holes on the
soundbar mounting brackets. Extra holes on the
back of the soundbar are for mounting to other TV
sizes and will be unused.
Helpful hint: Each soundbar mounting bracket is
labeled with one side that says “This Side Away
From TV” which is the side that does not touch
the TV. Reference the arrows on the label that
indicates the direction the bars should face.
b. Use four M6 screws and the Allen wrench to
loosely screw the soundbar mounting brackets
to the soundbar. Lift the soundbar up slightly to
align it when doing this. Do not tighten. Leave
the screws loose so you can properly align the
soundbar later.
c. 
on top of the soundbar mounting brackets.
Reference your TV mount installation instructions
to ensure proper placement. Use four M8 screws
or the VESA screws that came with your TV mount

the TV mount brackets and soundbar mounting
brackets tight to the TV.
Optical
Digital
Audio Input
Aux In
Power
Input
Micro
USB
adhesive!
push
Optical
Digital
Audio Input
Aux In
Power
Input
Micro
USB
adhesive!
push
NOTE: If using a Séura Outdoor Mount, use the
hardware included with the Séura mount. If using
a competitor’s mount, use screws that are long

soundbar mounting brackets and into the VESA
holes, but not too long where it won’t tighten the
brackets to the TV.
Do not tighten yet!