Instruction Manual

10
Operation and Storage Requirements
The maximum ambient temperature range for operating the device is -40°F to 140°F*. The screen is most


electric shock, never allow liquids to enter the unit. The uninstalled product must be stored in dry and well

may not be stored in the proximity of the device. The required storage temperature is -40°F to 140°F at
an air humidity of 10 - 90% RH non-condensing. The device must be stored in the complete packaging, as


When the unit is used in temperatures below the ideal operating temperature range, the picture may appear slightly delayed or
blurred. This is normal, and the picture will return to normal aer the temperature increases to the ideal operating temperature
range.
Séura Full Sun Series TVs are the only outdoor TVs with internal fans that actively heat and cool the electronics, a feature
necessary for controlling the internal TV temperature in environments from -40° F to 140° F. The fans are performing as designed
when creating a low-level hum when activated. Séura’s cooling system volume specification is <40dB from 1 meter away from TV,
with thermostatically control and modifiable control curve. The fan speed will increase in hoer temperatures in order to keep
the TV cool. Fan speeds, as a percentage with 100% = full speed, at various TV temperatures are approximately: 104F = 26%
113F = 58% 122F = 89% 131F = 100%
*Installation in sunlight reduces the maximum permitted air temperature.
The screen is most
optimally viewed at ambient
temperatures of 32°F to 122°F
IMPORTANT
The display should not be installed directly over a

splash up onto the lower portion of the display.

internal components and should be avoided.
IMPORTANT
Le moniteur ne doit pas être installé directement sur une
surface plane, si de fortes pluies ou de conduite peut
aque d’eau et éclabousser sur la partie inférieure du
moniteur. Lumière directe du soleil sur l’écran du moniteur
va chauffer les composants internes et devrait être évitée.