User Manual

Components
1.Belt
2. Rotating plate
3. Supporting feet and tube fixer
4. Camera mounting platform
5. Supporting feet and tube fixer
6. Carbon fiber tubes
7. Tripod mounting plate
820mm
1 2 3 4 5
6
7
1. Carbon fiber and aluminum construction
2. Light weight and durable
3. Quiet and smooth movement
4. Removable rotating plate
5. Foldable supporting feet
6. Built-in screw socket on carbon fiber tubes
7. Extandable with extra carbon fiber tubes
Limited One-year Warranty
Sevenoak provides a limited warranty that this product is free
from defects in materials and workmanship to the original
purchaser under normal use for a period of one (1) year from
the original purchase date or thirty (30) days after replaceme
nt (the “Warranty Period”), whichever occurs later. Our respon
sibility with respect to this limited warranty shall be limited
solely to repair or replacement, at its option, of any product
which fails during normal consumer use.
To obtain warranty coverage during the Warranty period,
contact your place of purchase (”Seller”) to obtain a return
merchandise authorization (”RMA”) number, and return to
Seller the defective product along with proof of purchase
and the RMA number.
● Please read and follow these instructions, and keep this
manual in a safe place.
● Handle the unit with care.
● Clean the unit with a soft, dry cloth.
● Use only parts provided by the manufacturer.
● Make sure everything is secure before proceeding.
● Make sure the item is intact and that there are no missing
parts.
● Do not exceed the maximum load capacity.
● All photos are for illustrative purposes only.
Warnings
This warranty does not extend to damage or failure which
results from misuse, neglect, accident, alternation,abuse,
improper installation or maintenance. Except as provided her
ein, sevenoak makes neither any express warranties nor any
implied warranties, including but not limited to any implied
warranty of merchantability or fitness for a particular purpose.
This warranty provides you with specific legal rights, and you
may also have additional rights which vary from state to state.
2016 Sevenoak lnc.Visit us on the
web at www.sevenoak.biz
SK-TXS80
Carbon Fiber Track Slider
Maximum load capacity: 10kg
Overall length: 82cm
Effective working distance: 58.4cm
Carbon fiber outer diameter: 22mm
Material: Carbon fiber and Aluminum
Specifications
Features
Thanks for choosing Sevenoak carbon fiber slider SK-TXS80.
SK-TXS80 is a portable and extendable carbon fiber slider
designed for both amateur and professional photographers/
video makers. It features a belt-drive system driven by an
included flywheel. The flywheel attaches to the end of the
slider, providing a handle for smooth and precise hand-
cranked slides, even at slow speeds. It also serves as an
inertial dampener that helps your camera stop smoothly
for usable tracking shots and push-ins from start to finish
of each take.
The sliding plate features a 3/8” screw which is compatible
with most tripods heads, besides this, the sliding plate is
also built with several extra 1/4” and 3/8” threaded holes
which enables to you attach other accessories like LED
lights, Microphone or monitor etc.
SK-TXS80 is equipped with four angle adjustable legs with
height adjustable rubber ball feet which enable you to get
the level or canted shot you’re looking for. A built-in bubble
level is available to aid in horizontal alignment. To help
bring the overall weight of the slider down, SK-TXS80
uses durable and lightweight carbon fiber rails. The carbon
fiber rails not only make the movement quiet and smooth,
but also enable you to extend the length of the slider to 1
.2m and 1.6m by only purchasing extra extension rails
separately from Sevenoak.