Warranty Guide
LIFETIME LIMITED WARRANTY
Installation Information:
1. Butt Boards Tightly: Because treated wood is often
still wet when delivered to the store and jobsite, it is
important to butt deck boards together during
installation as they will shrink slightly in width and
thickness as they dry out.
2. Drill pilot holes to minimize the splitting when nailing
near the edge or end of a board.
3. Always use the best deck face of a deck board. Nail
thin boards to thicker boards.
4. Fasteners: Hot-dipped galvanized, stainless steel or
Building code approved fasteners are required for all
exterior wood.
5. Finishing: A finish coat of clear or semi-transparent
water repellent stain with UV protection will additionally
help to maintain the beauty of your deck. Always
follow manufacturer’s application instructions.
Safe practices when working with
Pressure-treated wood
• Weargloveswhenworkingwithwood.
• Wear a dust mask when machining any wood to
reduce the inhalation of wood dusts.
• Wear appropriate eye protection to reduce the
potential for eye injury from wood particles and flying
debris during machining.
• Wash hands thoroughly with mild soap and water
after working with treated wood.
• All sawdust and debris should be cleaned up and
disposed of after construction in accordance with
local waste management regulations.
• Donotburnpressure-treatedwood.
• Washworkclothesseparatelyfromotherhousehold
clothing before reuse.
• Pressure-treatedwoodshouldnotbeusedwhereitmay
come into direct or indirect contact with drinking water,
except for uses involving incidental contact such as fresh
water docks and bridges.
• Donotusepressure-treatedwoodincircumstances
where the preservative may become a component of
food, animal feed or beehives.
• Donotusepressure-treatedwoodformulch.
• Preserve may be disposed of in landlls or burned
in commercial or industrial incinerators or boilers in
accordance with federal, state and local regulations.
© VIANCE 2012
200E.WoodlawnRoad,Suite350
Charlotte, NC 28217
1-800-421-8661•Fax:704-527-8232
ProductInfo@viance.net