User manual

10
Electric table-top hot-plate
Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
The appliance should only be connected
to a socket installed in accordance with the
regulations.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label. This product complies with all
binding CE labelling directives.
Familiarisation
1. Power cord with plug
2. Cooking surface
3. Control panel
4. On/Stand-by switch
5. Function indicator - Timer
6. Operating key & function indicator -
Temperature
7. Selection keys (+ and -) for Power /
Temperature / Timer setting
8. Operating key & function indicator -
Power
9. Operating key - Timer
10. Display
Important safety instructions
∙ In order to avoid hazards, and to
comply with safety requirements,
repairs to this electrical appliance or
its power cord must be carried out by
our customer service. If repairs are
needed, please send the appliance
to our customer service department
(see appendix).
∙ Before cleaning the appliance,
ensure it is disconnected from the
power supply and has cooled down
completely.
∙ To avoid the risk of electric shock, do
not clean the appliance with liquids
or immerse it.
∙ Clean the cooking surfaces with
a damp cloth after each use. For
detailed information on cleaning the
appliance, please refer to the section
Cleaning and care.
∙ Caution: To avoid the risk of electric
shock, the unit must be switched off
and disconnected from the mains
if the surface shows any sign of
cracking or similar damage.
∙ The appliance is not intended to be
operated by means of an external
timer or separate remote-control
system
∙ Do not place any metal objects (eg
knives, forks or spoons) onto the
cooking surfaces, as such objects
GB