8 10 7 16 9 6 5 4 3 17 2 11 15 14 13 1 12 3
Steam Iron Dear Customer, Before using the appliance, the user should read the following instructions carefully. ● Connection to the mains supply The appliance should only be connected to an earthed socket installed in accordance with the regulations. Make sure that the supply voltage corresponds with the voltage marked on the rating label. This product complies with all binding CE labelling directives. ● ● Familiarisation 1. Rating label 2. Temperature control knob 3. Steam jet button 4.
● No responsibility is accepted if damage Anti-drip function If the temperature of the soleplate is not sufficient to produce steam, the water supply is cut off automatically to prevent dripping. results from improper use, or if these instructions are not complied with. ● This appliance is intended for domestic use only and not for commercial applications.
- - ● ● ● ● temperature control knob. After filling the reservoir with water, place the steam iron upright on its base stand and insert the plug into the wall socket. Set the temperature control knob to the required ironing temperature as indicated by the ironing symbols. During the heating-up process the red and green indicator light will be on. The red indicator light will go out once the required ironing temperature is reached.
- maximum level mark with water. Place the iron on its base stand and insert the plug into the wall socket. Set the temperature control to its maximum. Wait until the red indicator light goes out. Remove the plug from the wall socket. Hold the iron horizontally over a sink. With the self-cleaning button depressed, swing the iron lightly to and fro until no more steam or hot water is emitted. Pour out any remaining water from the reservoir.
