Instructions

11
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
Do not touch any moving parts during
operation, and do not insert any
implements (e.g. dough scrapers or
cooking spoons) into the bowl unless the
motor has come to a complete standstill.
No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
Before using for the rst time
Before the appliance is used for the rst
time, all attachments and accessory parts
must be cleaned as described in the
section Cleaning and care.
Short-term operation
When using the speed levels 1 - 5, the
unit should not be operated continuously
for more than 4 minutes. Switch off the
appliance afterwards and allow the motor
to cool down for 20 minutes.
Switch settings
The appliance is equipped with a multi-
stage switch.
Setting 0: The appliance is switched off
Settings 1 & 2: For mixing light and
liquid mixtures or when stirring in any
ingredients
Settings 3, 4 & 5: For stirring and
kneading
For heavy dough mixtures, setting 5
must be used.
Turbo setting
Maximum speed may be obtained for
short periods of time by pressing down the
turbo button, regardless of the speed level
selected.
Selecting the attachments
Beater attachments
Suitable for light and liquid mixtures
such as crèmes, mixing dough, mashed
potatoes, egg white or cream etc.
Dough hooks
For heavy, kneading-type dough.
The hook with the integrated plate must
be inserted into the larger opening.
Operation
Insert the selected attachments into the
openings on the underside of the mixer
and push them gently upwards until they
lock into place.
Depending on the quantity of
ingredients, use a suf ciently deep bowl.
Any bowl, round container or glass is
suitable, provided it is scratch-proof and
the attachments can rotate freely inside.
Connect the appliance to the mains.
Once the attachments are tted, take
the blender in hand and position the
attachments inside the container lled
with the ingredients.
Use the multi-stage switch to turn the
appliance on.
Once processing is nished, or if you
wish to interrupt the operation, switch off
rst and wait until the motor has come
to a complete standstill before lifting the