Instructions / Assembly

ManualsBrandsSevertson ManualsElectrical120 in. Home Theater Screen

Thank you for purchasing a Broadway Screen.

Read entire Assembly and Installation Instructions before assembly.

Take all safety precautions such as wearing safety glasses during assembly and installation.

Keep manual for future reference.

www.broadwayscreens.com

Summary of content (6 pages)

PAGE 1
Thank you for purchasing a Broadway Screen. Read entire Assembly and Installation Instructions before assembly. Take all safety precautions such as wearing safety glasses during assembly and installation. Keep manual for future reference. www.broadwayscreens.
PAGE 2
Follow these instructions carefully. Proper assembly and installation will allow you to enjoy your screen trouble-free for years to come. Preparing your screen for installation • Carefully open the packages and lay out all the parts on a clean flat surface. • Do not use knives or sharp objects. • Do not unroll the screen material at this time. Parts Preassemble the top and bottom frame pieces as shown below to prepare for assembly.
PAGE 3
Installation of Snap Lugs Slide the snap lugs into the track of the extruded aluminum frame as shown below. You will need the same number of snap lugs as there are arrow stickers. Align the snap lugs with the arrow stickers on the frame. Exact alignment is not critical. Two extra snap lugs are included. Installation of Mounting Brackets to Frame There are two types of mounting brackets supplied. Upper mounting brackets and lower mounting brackets.
PAGE 4
Assembling the frame • On your clean work surface, align all frame parts in the shape of the finished screen. • Slide the “L” Brackets into each corner of the frame. • Bring frame pieces all the way together, holding corners tightly together and tighten the screws. Installing the screen material • Wash your hands and make sure the work area is very clean. • Carefully unroll the screen material. Use caution, as there are four tensioning rods inside the screen material tube.
PAGE 5
• Line up the snap lugs and the screen material with the frame and press the snap lugs through the hole in the screen material. Adjustment and re-adjustment may be necessary. The tensioning rods go to the outside of the snap lug. • Continue the process of pulling the screen material over the snap lugs all the way around the frame. Continue positioning the screen material and snap lugs until the screen material is evenly tensioned across the whole surface.
PAGE 6
Mounting the screen onto the wall If you are not properly trained to mount this Broadway screen onto the wall, please consult or hire a professional to install the projection screen. • Select an appropriate location to mount the screen to the wall. Make sure the location will not interfere with existing features in the room or cause damage to the screen. • Do not install screen over electrical outlets or switches. • Select the proper fastening hardware for your wall type.