Installation Guide

13
Wall Anchor Construction Installation
Method
#
2 — Straight, 90° Sharp Corner And
Finishing Pieces Applications
1. PrePare OPening Or CurB
A. Make sure the opening is the correct size. Use the table below
to find the correct dimensions for a straight glass block wall
anchored on two jambs using channels.
1 3 - 1/2 7 - 1 /2
2 7 - 1/8 15 - 1 /8
3 10 - 3 /4 22 - 3 /4
4 14 - 1/2 30 - 1 /2
5 18 - 1/8 38 - 1 /8
6 21 - 3 /4 45 - 3 /4
7 25 - 3/8 53 - 3 /8
8 29 61
9 32 - 3 /4 68 - 3 /4
10 36 - 3/8 76 - 3 /8
11 40 84
12 43 - 5/8 91 - 5 /8
Installation Method
#
2
Anchor Wall Construction
Design Line 80mm Metric
Number
of Blocks
Note: Blocks are available in 90 mm and
190 mm sizes (3-1/2” and 7-1/2”)
For panels larger than 12 block in width or height:
Add 3 - 5/8” for 90 mm wide block
Add 7 - 5/8” for 190 mm wide block
90mm Block Width
(3-1/2”)
190mm Block Width
(7-1/2”)
Rough Opening Width (Inches)*
*For Rough Opening’s Total Height, Add 1/4” to Width Measurement.