Installation Guide

22
Grout Finishing
IMPORTANT:
Sanded acrylic polymer modified
cement based grout, or urethane
based sanded grout suitable for use
on ceramic, porcelain, or glass tiles
MUST be used.
E. After the grout has cured for 72 hours, caulk all perimeter joints
with a bead of sealant.
CAUTION:
D. Apply a second coat of sealer once the first coat is dry.
Avoid contact with skin. Safety glasses and impervious gloves are
recommended to minimize skin and eye contact. Also provide suf-
ficient mechanical ventilation.
C. For applications in humid envi-
ronments, wait 72 hours and ap-
ply sealer to the grout lines with
a paint brush. Immediately wipe
sealer off glass surfaces to prevent
it from adhering to the glass.
B. Follow directions on the Surface Grout container for grout
application.
A. Remove any sealant squeezed out from the joints with a utility
knife.
Do not finish the joints until
sealant has cured for 24 hours
4 C