Installation Guide

13
D. Use a soft, dry cloth to remove the excess lm. A
common household plastic scouring pad can also
be used.
E. Cut the expansion strip to a 1-1/2" width and
insert it between the top of the blocks and the
frame.
F. Apply sealant to the back of the half-section of
channel and install it between the expansion strip
and frame.
G. Apply glass block sealant around the perimeter
to seal the glass block and channel. Also seal
the top channel to the frame at the head.
Note: For exterior panels or wet areas, also seal
where the channels meet the framing.
TOP HALF CHANNEL
7E
7F
7G