Installation Guide

17
Note: Prepare a supply of “T” spacers before you
start, so that your panel construction can continue
without interruption.
Note: It is important to le o any burrs.
C. Dry construct your panel (without mortar) to
ensure that your block ts the opening and you
have an adequate supply of prepared spacers.
This is a reference guide for where “REGULAR” and
modied spacers are used.
• Where glass block meet the jambs and curb,
(except for the four corners) orient the spacer
with the cross arm down and
clip o the upper set of toothed
legs, and the upper half of the
twist-o tab.
These are
called “T”.
“REGULAR” Spacer
Modied Called “T”
= “REGULAR” Spacer
= “L” Spacer
= “T” Spacer