Installation Guide
17
4C
Grout Finishing
IMPORTANT: Sanded acrylic
polymer modied cement based
grout, or urethane based sanded
grout suitable for use on ceramic,
porcelain, or glass tiles MUST be
used.
CAUTION: Avoid contact with skin.
Safety glasses and impervious gloves are
recommended to minimize skin and eye contact.
Do not nish the joints until sealant has cured for
24 hours.
A. Remove any sealant squeezed out from the joints
with a utility knife.
B. Follow directions on the Surface Grout container for
grout application.
C. For applications in humid
environments, wait
72 hours and apply
sealer to the grout
lines with a paint
brush. Immediately wipe
sealer off glass surfaces to
prevent it from adhering to
the glass.
D. Apply a second coat of
sealeroncetherstcoat
is dry.
E. After the grout has cured for
72 hours, caulk all perimeter joints with a bead of
sealant.