Installation Guide

D. Apply a 1/4" bead of sealant horizontally across

the top of the opening 1/2" from the face of the

glass blocks. This sealant line will be used to

secure the second half of the top channel.

E. Apply a 1/4" bead of sealant along the top inside

leg of the second half channel.

F. Slide the half channel into place between the

blocks and the top of the opening. If necessary,

temporarily apply a piece of tape to the channel to

hold it in place until the sealant sets.

G.Wait24hoursbeforenishingthejointstoallow

the sealant to cure.

Note: Please go to page 18 for joint nishing instructions

to complete your project.