SEVIC BLUE LASER SBL0105MP4 - Instruction Manual V20070731
TABLE OF CONTENTS Safety Information ……………………………………………………………………….2 Features...……………… ………………………………………………………………...3 Accessories………………………………………………………………………………..4 Front Panel .…………………………………… ………………………………………….5 Rear Panel ..…………………………………… ………………………………………….5 Base Panel …………… ………………………………………………………………….5 Remote Control …………………………………………………………………………...6 Installation …………………………………………………………………………………8 Unit Removal ……………………………………………………………………………..
SAFETY INFORMATION Please read the manual carefully before operating this unit and keep it for future reference. CAUTION: This unit is a class 1 laser product. To prevent direct exposure to the laser system, do not open the unit. The laser beam may hurt your eyes. If the unit requires adjustments, contact an authorized service centre. USE THIS PRODUCT SAFELY Be sure you fully understand the following safety information: When driving Keep the unit at an appropriate sound level.
FEATURES - ISO/1-DIN Size (178mm x 54mm) - DVD/DVD-R/DVD-RW/VCD/CD/CD-R/CD-RW/MP3 Compatible - 3.
ACCESSORIES Mounting Sleeve x 1 Keys x 2 Remote Control x 1 Back Strap x 1 Main Wire Harness x 1 Operational Manual x 1 11 Rear Mounting Bolt x 1 5X5 Screws x 4 Faceplate Case x 1 Trim Bezel x 1 12 4 4 iPod Cable x 1 -4- USB Cable (option)
FRONT PANEL 1. POWER / SOURCE 2. PTY / SEL 3. VOLUME + 4. VOLUME 5. TA / MUTE 6. PLAY / PAUSE 7. PREVIOUS 8. NEXT 9. F.REW 10. F.FWD 11. STOP 12. MINI USB 13. REMOTE 14. REL 15. BAND / AST 16. EJECT / P.ANGLE REAR PANEL 17. RADIO ANTENNA, IPOD MINI DIN 19. VIDEO AUDIO OUTPUT & INPUT 18. 16PIN SOCKET BASE PANEL 20.
REMOTE CONTROL 1. POWER/SOURCE 2. MUTE 3. NUMBER BUTTONS 4. MENU 5. AUDIO 6. DISPLAY 7. UP (Tune up) /PTY 8. LEFT (Seek Down) 9. ENTER / BAND 10. PROGRAM 11. DOWN(Tune Down)/AF 12. F.REW 13. F.FWD 14. SLOW 15. RANDOM 16. ZOOM 17. SELECT 18. EJECT / P.ANGLE 19. SETUP 20. VOLUME+ 21. VOLUME22. LOUD / EQ 23. PBC / AST 24. TITLE -6- 25. SUBTITLE 26. PREVIOUS 27. RIGHT(Seek up) 28. NEXT 29. D.ANGLE 30. PLAY / PAUSE 31. STOP 32. A-B 33. REPEAT 34. PAL / NTSC 35.
Replacing the Batteries If the remote control has no function or if the operating range is reduced, replace the old battery with new one. 1. Remove the battery cover. Follow the arrow (1) slide the tab to the right while pulling the cover away at the same time. 2. Place the new battery in the tray and slide the cover back into place. 3. Make sure the cover is locked into place.
UNIT INSTALLATION Installation Method 1: Din Front -Mount Install the Mounting sleeve in to the dashboard. Bend as many claws outward for tight fit, to lock the sleeve into place.
Install the trim bezel to the unit. (Arched surface toward the bottom). Use the Rear Mounting Bolt to support the unit.
Installation Method 2: Using the screw holes at the sides of the unit (ISO Mount). 1. Remove the hooks on both sides. 2. Select a position where the screw holes of the mounting bracket supplied with the car and the screw holes of the main unit become aligned, tighten the screws on each side, and re-mount the brackets with the factory hardware in the original location. NOTE: 1 and 10 are not used for installation method2.
UNIT REMOVAL (when installed using the sleeve) 1. Detach the front panel. 2. Insert the keys supplied w ith the unit on both sides (as illustrated) as this will release the internal locks so you can slide the unit out.
WIRE CONNECTION - 12 -
DISC NOTES ■ Disc formats supported by this player Handling and cleaning Dirty, dusty, scratched or warped discs may not play properly. Do not place stickers or make scratches on discs Do not warp discs. Store discs in their cases when not in use. Do not place discs in the following places: 1. Direct sunlight. 2. Dirty, dusty and damp areas. 3. High temperature places. 4. On the seats or dashboard. Disc Cleaning Use a dry soft cloth to wipe the surface.
DISC OPERATIONS Repairing New Discs with Rough Spots A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting w ill not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ballpoint pen or pencil. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc.
BASIC OPERATIONS Power: Press the [POWER/SOURCE] button to turn the unit ON ; Hold on pressing the button to turn the unit OFF.
Hold on pressing the [SEL] button once to enter the Sound Parameter Setup: FADER: BALANCE: BASS: TREBLE: LOUDNESS: EQ: SUBWOOFVOL: SUBWOOFFRQ: F15 – CENT – R15 L15 – CENT – R15 -15 – 00 – +15 -15 – 00 – +15 400HZ – 800HZ – 2400HZ - OFF USER – POP – CLASSIC – ROCK – JAZZ – USER 00 – 15 80HZ – 120HZ – 160HZ - OFF In all modes except Radio Mode, hold on pressing the [SEL] button twice to enter the Picture Parameter Setup : NTSC/PAL: AUTO – PAL – NTSC – AUTO COLOR: 00 – 30 BRIGHT: 00 – 30 CONTRAST: 00 – 30
In the Radio mode, hold on pressing the [SEL] button twice to enter the Tuner Parameter Setup: LOCAL: ON / OFF When you are using the local searching function of LOCAL, you can only receive the radio station with strong enough signals and fine state. STEREO: ON / OFF AREA: EUROPE – ASIA – USA – JAPAN – OIRT – EUROPE This tuner can be switched t o work in different countries. Choose the area that works best for you.
Viewing Angle Adjustment: Press and hold the [P.ANGLE] button to adjust the angle of the face. Angle 1 - Angle 2 - Angle 3 - Angle 4 - Angle 1 Angle 1 Angle 2 Angle 3 Angle 4 NOTE: You can also make the same adjustments with the remote control. Simply press and hold the [P.ANGLE] button to adjust according to your preference. Restore Default Angle Turn OFF the unit; then press preset buttons 1 ,2 3, [ENTER] on the panel. The motor and gear dri ves are now back to their factory positions.
RADIO OPERATIONS Press the [POWER/SOURCE] button to switch to Radio Mode. 1, BAND 2, FREQUENCY 3~8, STORED CHANNEL Switch FM/AM Wave Band Press the [BAND/AST] button on the panel or the remote control t o switch the wave band as following: FM1 -FM2-FM3-AM1-AM2 Automatic Tuning Hold on pressing [>] / [<] buttons of remote control to seek the next available channel by increasing / decreasing the tuning frequency; p ress any button to stop seeking.
NOTE: The unit will stop on the beginning frequency if no available station after seekin g one cycle. After Preset Stations, the former stored stations will be instead. Manual Store Radio Station Hold on pressing the number buttons on the panel or the remote control, you can store current radio frequency to the stored channel. For example, c urrent frequency is 98.5MHZ, by hold on pressing button 2; you can store the radio station of 98.5MHZ to the channel 2.
2. TA Press the TA button to activate the Traffic Announcement mode, the letters "TP" will flicker on the display; when receiving the TP signal, "TA TP" will be displayed without flickering on the LCD. If you had a radio station before, the system will automatically switch to radio mode and broadcast the traffic announcement when the traffic announcement begins in every mode.
DVD PLAYER OPERATION S 1, Press the [POWER/SOURCE] button to switch to DVD Mode if disc inside. 2, When disc loading, the unit will switch to DVD Mode automatically. Inserting Disc Press [EJECT] button, the front panel will slide down to Position 1; then insert a disc into the Disc Loading Slot; the panel will slide back automatically. .
Zoom Press the [Zoom] button during normal playback to zoom a picture. Press it repeatedly to switch between the zoom levels. Repeat Press the [REPEAT] button to repeat the same track, press it twice to repeat all tracks. When playing a DVD movie, pressing once will repeat the sam e chapter but pressing twice will repeat the entire title. Angle Press the [D.ANGLE] button during playback to select different viewing angles with interactive DVD media.
SD / USB OPERATIONS 1, Press the [POWER/SOURCE] button to switch to SD or USB Mode if SD / MMC Card or Mini USB connected . 2, The unit will switch to SD or USB Mode automatically if SD / MMC Card or Mini USB connected. 3, The unit will switch to RADIO Mode automatically when SD / MMC Card or Mini USB disconnected if there is no disc in the unit; the unit will switch to DVD Mode automatically when SD / MMC Card or Mini USB disconnected if there is a disc in the unit.
AV IN OPERATON Press the [POWER/SRO UCE] button to switch to AV IN Mode. There are 2 RCA Audio Inputs & 1 RCA Video Input for unit. REAR VIEW OPERATIONS 1, When car backup, the unit will switch to REAR VIEW Mode automatically if backup camera connected. 2, The monitor will display the pic ture taken by the backup camera. 3, The unit will return to the former working Mode when backup finished.
DVD SETUP MENU SETUP MENU OPERATION Press the [SETUP] button of r emote control to enter the DVD SETUP Menu. Press the [<] / [>] buttons to switch the main menus as following: SYSTEM – LANGUAGE – AUDIO – VIDEO – SPEAKER – DIGITAL Press the [] / [] buttons to enter the submenus from main menus. Press the [] button on the top submenu or press the [] button on the bottom of submenu to exit the submenus to main menus. Press the [] / [] buttons to select the submenus as your need.
TV SYSTEM Following options are available for the TV Displa y: NTSC PAL 60 PAL AUTO SCREEN SAVER Select ON or OFF. VIDEO Following options are available for the TV Display: INTERLACE-YUV TV-RGB P-SCAN YPBPR S-VIDEO TV TYPE Following options are available for the TV Display: 4:3 PS 4:3 LB 16:9 PASSWORD Setup the password for Parental Ratings change. The default password is 0000.
OSD LANGUAGE Following options are available for the OSD LANGUAGE: ENGLISH GERMAN SPANISH FRENCH PORTUGUESE ITALIAN RUSSIAN DUTCH SWEDISH KOREAN DANISH NORWEGIAN POLISH HUNGARIAN AUDIO LANGUAGE Following options are available for the AUDIO LANGUAGE: ENGLISH GERMAN SPANISH FRENCH PORTUGUESE ITALIAN RUSSIAN DUTCH SWEDISH KOREAN DANISH NORWEGIAN POLISH HUNGARIAN SUBTITLE LANGUAG E Following options are available for the SUBTITLE LANGUAGE: ENGLISH GERMAN SPANISH FRENCH PORTUGUESE ITALIAN RUSSIAN DUTCH SWEDISH K
AUDIO OUT Following options are available for the AUDIO OUT: SPDIF / OFF SPDIF / RAW SPDIF / PCM KEY Following options are available for the KEY: b -4 -2 0 +2 +4 # VIDEO SETUP BRIGHTNESS Following options are available for the BRIGHTNESS: 0 2 4 6 8 10 12 CONTRAST Following options are available for the CONTRAST: 0 2 4 6 8 10 12 HUE Following options are available for the HUE: -6 -4 -2 0 +2 +4 +6 SATURATION Following options are available for the SATURATION: 0 2 4 6 8 10 12 - 29 -
SPEAKER SETUP DOWNMIX Following options are available for the DOWNMIX: LT / RT Stereo VSS BASS MODE Following options are available for the BASS MODE: ALL LG SPK ALL SM SPK MIXED SPK DIGITAL SETUP OP MODE Following options are available for the OP MODE: LINE OUT RF REMOD DYNAMIC RANGE Following options are available for the DYNAMIC RANGE: FULL 6/8 4/ 8 2 /8 OFF - 30 -
DUAL MONO Following options are available for the DUAL MONO: STEREO MONO L MONO R MIX MONO - 31 -
SPECIFICATIONS GENERAL Supply Voltage Load Impedance Max Power Output Bass 100Hz Treble 10KHz Dimensions (approx.) Mounting (approx.) FM TUNER Frequency Range IF Usable Sensitivity Stereo Separation Frequency Response AM TUNER Frequency Range : 14.4V DC (11-16V allowed) : 4Ω per channel : 50W x 4 : ≥ 10dB : ≥ 10dB : 187 x 188 x 60 mm (d/w/h) : 160 x 178 x 50 mm (d/w/h) : 87.5 – 108 MHz (Europe/Asia) 87.5 – 107.9 MHz (USA) : 10.
TROUBLE SHOOTING SYMPTOM No sound The memory contents are lost The disc does not play The disc comes out automatically The disc can not be inserted The function buttons do not work Audio skipping No picture Picture stops (pauses) Poor radio reception CAUSE / SOLUTION Cancel the mute function. Adjust the volume. Disconnect the power wire or battery. Press the reset button. The disc might be dirty or damaged. The temperature is outside the range of the operating temperature.
Warranty Terms & Conditions 1) Coverage: Claims can be made only upon presentation of a valid proof of purchase such as an invoice or receipt. 2) Application: The present warranty enters into effect on the date of delivery to the user. 3) Period of validity: 2 years warranty for the device - 90 days for the accessories (components of the product).
