Inc UltraSlimline Floor Fan Instruction Manual 10187

6
(2) Medium Natural Wind - The wind settings will repeat
the following 80 second wind cycle with Medium speed
being the most common.
(3) High Natural Wind - The wind settings will repeat the
following 80 second wind cycle with high speed being the
most common.
Oscillating Selection: This function starts & stops the
oscillation of the fan.
Controlling the Oscillation Angles: To change the wind
direction, place both hands on the fan and turn the fan body
to the left or right. There are 5 positions to choose from to
change the oscillation angle. To have the fan fully oscillate
left and right, have the fan in the third or center position.
Control Panel
5
Selection of Wind: Allows for three different wind settings:
1. Normal Wind: The Normal wind mode is simply the Low,
Medium & High fan speed settings.
2. Sleeping Wind: The Sleeping Wind allows you to set a speed
and that speed will gradually slow to Low. The air flows as an
evening breeze slowing to a light night breeze.
(1) Low Sleeping Wind - The air flow will remain at Low
speed.
(2) Medium Sleeping Wind - The air flow begins at Medium
speed for half an hour and then
drop to Low speed.
(3) High Sleeping Wind - The air flow will remain on High
speed for half an hour, then drop
to Medium speed for half an hour,
and finally drop to Low speed.
3) Natural Wind: The natural wind mode automatically
selects wind speed randomly as you would find outdoors.
The speeds are graphically described below.
(1) Low Natural Wind – The wind settings will repeat the
following 80 second wind cycle with Low speed being
the most common.
Control Panel