energy s aving towerfan with remote 10202 Voltage: 120V DC Current: 0.
Fan Assembly Tilt & C ontrol Panel 0- 6°-12° STEP 3 Pass the Power Cord through the center hole of the BASE. Align the BASE front with the FAN front and insert the four posts on the FAN-Body into the four holes on the top of the BASE. It will only go one way. Place the 4 Fan-Body SCREWS D into the holes through the bottom of the base and securely tighten.
Control Panel Control Panel Selection of Wind: Allows for three different wind modes: Normal Wind: Speed dial allows five different speed settings 5 4 3 2 1 0 Sleeping Wind: The Sleeping Wind allows you to set a speed and that speed will gradually lower to Low . The air flows as an evening breeze slowing to a light night breeze. Low Sleeping Wind The air flow remains at Low. Medium Sleeping Wind The air flow begins with medium speed for a half hour then drops to Low speed for a half an hour.
Speed Mode - Allows five different speed settings
