Installation Manual

Seville Classics
Torrance, CA 90501 USA
www.sevilleclassics.com
OFF65800_v2.4
2
Assembly
Step 1. Attach
Cylinder to Top
Tool required: Allen key (K)
Place the top of the desk
(A) f
ace down so the
mounting plate faces up.
CAUTION: Place a blanket
between the top and hard
floors to avoid scratches.
Line up the holes on the
cylinder (B) with holes on
the mounting plate. Secure
cylinder with four screws
(G) and Allen key. Tighten
until snug.
IMPORTANT: Make sure
adjustment lever (C) can
reach the mounting holes
on the back of the top (A).
Step 2. Install
Adjustment Wire
Press the adjustment wire
into the bracket on the
back side adjustment lever
(C).
Important: Lever will not
work and height will not
adjust if wire is not clipped
in correctly.