Installation Manual

Seville Classics
Torrance, CA 90501 USA
www.sevilleclassics.com
OFF65800_v2.4
3
Step 3. Install
Adjustment Paddle
Tool required: Allen key (K)
Line up the holes of the
adjustment lever (C) with
the holes on the back of
the desk. Secure
adjustment lever with
three screws (G) and Allen
key (K). Tighten until snug.
Step 4. Attach Base
to Cylinder
Tool required: Allen key (K)
Turn the base (D) upside
down and fit it to the small
end of the cylinder (B).
Match the three holes on
the bottom of the base
with the three holes in the
cylinder. Slip the locking
washers (L) over three
screws (G). Use the screws
and washers to secure the
base (D) to the cylinder
(B).
Tighten screws until snug
with the Allen key (K).