airLIFT® S3 Electric Height-Adjustable Standing Desk Models: OFF65803, 15, 74 Base + Top Kits: OFFK65818, 19, 22, 23, 26, 27, 75, 76, 77, 84, 85, 86 OFFK66001, 02, 03, 04, 05, 06, 11, 12, 13 Please contact Seville Classics for help with assembly and to report any damaged or missing components. Phone: 1 (800) 323-5565 Email: Support@SevilleClassics.com Homepage: www.SevilleClassics.
Welcome! We at Seville Classics® are thrilled that you’ve chosen to go airLIFT®! Our desks are some of the easiest to use, most versatile and sophisticated electronic desks on the market. With this, you can stay active throughout the day without sacrificing productivity. Choosing a height-adjustable desk is not just a convenient upgrade—it’s a healthy one! Too much sedentary behavior can present a real health risk, even for people who are already healthy.
Table of Contents SAFETY INSTRUCTIONS……………………………………………………………… 5 COMPONENT DIAGRAM……………………………………………………………. 6 PARTS LIST………………………………………………………………………………... 7 TOOLS & HARDWARE LIST………………………………………………………... 7 ASSEMBLY INSTRUCTIONS………………………………………………………... 8 Prepare Workspace…………………………………………………………... 8 Unpack & Unfold……………………………………………………………….. 9 Install Support Brackets…………………………………………………….. 10 Unlock Beam……………………………………………………………………... 11 Align Frame………………………………………………………………………..
Safety Instructions FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATING INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY Read and understand this manual before attempting to install or Assure that everyone who uses this product is informed of the contents of this manual. This is the responsibility of the Purchaser. Not intended for use by young children or for those persons who require supervision.
Component Diagram Control Box Top Support Bracket Support Bracket Legs Legs Foot Support Beam 6 Foot
Parts List A. Top E. Foot (2) B. Support Beam (1) F. Control Box (1) (pre-installed) C. Legs (2) (pre-installed) G. Controller (1) D. Support Bracket (2) Tools & Hardware List H. Allen wrench - 3mm O. Screw (10) I. Allen wrench - 5mm P. Bolt Sleeve (4) J. Allen wrench - 6mm K. M8x25 Bolt (4) Q. Washer (12) L. M6x16 Bolt (6) R. Fastener (6) M. M6x40 Bolt (8) S. Zip Ties (8) N. M6x6 Bolt (8) (pre-installed) T. Screwdriver Please make sure you have all the parts on this list.
Assembly Instructions: Prepare Workspace Lay down a blanket and place your Seville Classics® Ergo Table Top (or your own top) with the bottom side facing up on a soft, flat, even surface beneath the top to protect the surface. Layout all components and hardware. Examine each and make sure components are without damage. Support Beam Feet (x2) Support Bracket (x2) Legs (x2) (pre-installed) Control Box (pre-installed) Controller Examine the location where you'll be using the desk.
Assembly Instructions: Unpack & Unfold STEP 1. Remove SUPPORT BEAM (B) from box and set on TOP (A) with legs facing upward. STEP 2. Unfold legs until the holes on the legs and beam align.
Assembly Instructions: Install Support Brackets STEP 3. Slide SUPPORT BRACKET (D) into the SUPPORT BEAM (B). Tighten /w 6mm Allen Wrench Tighten /w 6mm Allen Wrench Tighten /w 6mm Allen Wrench Support Bracket Bolt Sleeve M8x25 Bolt 6mm Allen Wrench Insert BOLT SLEEVES (P) through holes on SUPPORT BEAM (B) and LEG (C). Insert M8x25 BOLTS (K) into sleeves and tighten with 6mm ALLEN WRENCH (J). Then, tighten inner 6mm bolts with a 6mm ALLEN WRENCH (J).
Assembly Instructions: Unlock Beam STEP 4. Unscrew the eight M6x6 BOLTS (N) marked in the diagram below from SUPPORT BEAM (B) with 3mm ALLEN WRENCH (H). 3mm Allen Wrench This unlocks the SUPPORT BEAM (B) and allows it to be extended, or shortened to accommodate different sizes of desk tops. Unscrew Screw the bolts back in to apply tension against the support beam and lock the top's width after aligning the base with the desk top appropriately.
Assembly Instructions: Align Frame STEP 5. With 2 people, pull or push the SUPPORT BEAM (B) to align the mounting holes on the SUPPORT BRACKETS (E) with the TOP (A). Seville Classics® Table Top features pre-installed mounting anchors. TIP: Frame is symmetrical and should be installed so that the CONTROL BOX (F) is near a power outlet. 110-120V STEP 6. Fit WASHERS (Q) between the SUPPORT BRACKETS (D) and the TOP (A). Washers fit into the three mounting holes on each support bracket.
Seville Classics® Top Assembly Instructions: Mounting airLIFT® Top STEP 7A. Use three M6x16 BOLTS (L) to secure each SUPPORT BRACKET (D) with 5mm ALLEN WRENCH (I). 5mm Allen Wrench M6x16 Bolt Screwdriver Install CONTROLLER (G) to either side of the desk top with two SCREWS (O). Screw Press firmly with screwdriver and twist to install SCREWS (O). TIP: Use an electric screwdriver to install screws more quickly.
Non-Seville Classics® Top Assembly Instructions: Mounting Other Top WARNING: Seville Classics® does not take responsibility for damage of customer-supplied parts or desk components. WARNING: Users MUST supply their own wood screws when installing their own top. BE SURE screws ARE NOT longer than top depth. STEP 7B. Pull or push the LEGS (C) on the base frame apart and center the assembly on the TOP (A) with about 2" to 3" between SUPPORT BRACKETS (D) and the table edge.
Assembly Instructions: Installing Feet STEP 8. Attach FEET (E) to the bottom of table legs with four M6x40 BOLTS (M) and 5mm ALLEN WRENCH (I). Leveling Foot (pre-installed) 5 mm Allen Wrench M6x40 Bolts Take this time to make sure all screws and bolts have been secured tightly.
Assembly Instructions: Cable Management STEP 9. Identify the MOTOR CABLES coming from the LEGS (C). Identify the CONTROLLER CABLE coming from the CONTROLLER (G). Guide them through the cable guard toward the CONTROL BOX (F).
Assembly Instructions: Connect Cables 110-120V Socket Power Cable Controller Cable Motor Cables STEP 10. Plug the cable from the CONTROLLER (G) to the left-side port on the CONTROL BOX (F). Then, plug the cables from the motors into the two right-side ports on the CONTROL BOX (F). NOTE: Motor cables can connect to either port interchangeably. Plug Power Cable into the other side of the control box and into a 120V power outlet.
Assembly Instructions: Turn Desk Over WARNING: TWO PEOPLE ARE NECESSARY TO TURN TABLE. DESK IS HEAVY. LIFT WITH EXTREME CAUTION. STEP 11. With the help of at least one other person, turn the desk onto it's feet. Desk with top weighs approximately 120 lbs. Lift with 2 people TIP: Screw the leveling feet in and out as necessary to ensure the desk stands level. DO NOT put weight on desk yet.
Initialization & Use Instructions DESK MUST BE INITIALIZED BEFORE YOUR FIRST USE SAVE MEMORY MEMORY 1 / 2 / 3 / 4 DISPLAY UP ARROW DOWN ARROW Initialize Press and hold the UP ARROW and DOWN ARROW simultaneously on the controller until three blinking zeros appear on the display, then release. The desk will descend to it's lowest height, then rise to it's highest height, and then descend to middle-height. When the number 38 (+/- 1) appears on the display, the desk is ready.
Cable Management Use ZIP-TIES (S) to affi x the cables from the CONTROLLER (G) and CONTROL BOX (F) to the SUPPORT BEAM (B) so that the cables wont snag or get in the way as the desk moves up and down. Fastener Stick FASTENERS (R) to the underside of the desk top near the controller. Thread the cable through the clip on the FASTENER (R) to keep the wires close to the table.
Troubleshooting Problem Action Desk does not go up or down and the controller does not illuminate when any button is pressed. Check all connections. Make sure power cord is plugged into the control box and a power outlet. Press any button on the controller and make sure it illuminates. Re-initialize the desk. Desk does not go up or down and the controller illuminates when any button is pressed. Unplug the power cord and re-plug after 10 seconds. Re-initialize the desk.
Warranty Information 7-Year Non-Electronic Component Warranty Seville Classics, Inc. warrants to the original retail purchaser that if this product proves to be defective in material or workmanship, we will replace the affected non-electronic part(s) for a period of seven years on Seville Classics airLIFT ® S3 Electric Height-Adjustable Standing Desks from the date of original purchase. 2-Year Electronic Component Warranty Seville Classics, Inc.
More from Seville Classics® Visit us at www.SevilleClassics.com for additional desk tops, bases, and other home goods. Seville Classics® Table Top Choose the desk top that just plain works. Seville Classics® Table Top with Beveled Bottom Edge pair with our airLIFT® Standing Desk frames straight out of the box. OFF65811 Black Visit us at www.SevilleClassics.com for desk accessories, as well as home storage and organization goods.
Specifications Maximum Height: 50.6" Minimum Height: 24.6" Minimum Width: 45" Maximum Width: 62.9" Footprint: 48" W x 23.75" D Lifting Speed: 1.5" per second Base Weight: 76 lbs. Maximum Weight Capacity (with Seville Classics® Ergo Top): 264 lbs. Customer Service Information Telephone: (800) 323-5565 Fax: (310) 533-3899 Hours: 8:30 AM – 4:30 PM (PST) Email: Support@SevilleClassics.com Homepage: www.SevilleClassics.
