Manual

To Assemble Two Separate (Shorter) Units:

Screw the Threaded Inserts (I) into the

bottom of the top poles. Push the Plastic

Caps (J) into the top of the bottom poles.

Then, screw the leveling feet into the

bottom of the top poles and bottom poles.

Finally, follow Step 3 to 6 on previous

page to assemble the shelves. Use Pole

Clamps (K) to joint two separate units

together (optional).

CAUTION:

• DO NOT STAND ON OR CLIMB ON THE SHELVING SYSTEM.

• DO NOT DROP HEAVY ITEMS ON THE SYSTEM.

• PLACE HEAVIER ITEMS ON THE LOWER SHELVES AND

LIGHTER ITEMS ON THE TOP SHELVES.

• DO NOT MOVE THE SYSTEM WHILE LOADED.

WARNING:

• EACH SHELF HOLDS 300 LB (136.0 KG) EVENLY DISTRIBUTED.

• ENTIRE SHELF SYSTEM HOLDS 2,100 LB (952.5 KG).

TF120104

7-SHELF WINE RACK

Model No. 16473

ASSEMBLY INSTRUCTIONS

Customer Service

Tel 1.800.323.5565

Fax 1.310.533.3899

Monday through Friday 8:30 am - 4:30 pm (Pacific Standard Time)

Seville Classics, Inc.

Torrance, CA 90501 USA

www.sevilleclassics.com

Please read and save these instructions

PAGE 1
To Assemble Two Separate (Shorter) Units: Screw the Threaded Inserts (I) into the bottom of the top poles. Push the Plastic Caps (J) into the top of the bottom poles. Then, screw the leveling feet into the bottom of the top poles and bottom poles. Finally, follow Step 3 to 6 on previous page to assemble the shelves. Use Pole Clamps (K) to joint two separate units together (optional). CAUTION: • DO NOT STAND ON OR CLIMB ON THE SHELVING SYSTEM. • DO NOT DROP HEAVY ITEMS ON THE SYSTEM.
PAGE 2
Please make sure you have all the parts before assembly A 4 pcs Top Poles B 4 pcs Bottom Poles C 4 pcs Screw Connectors D F 8 pcs Leveling Feet G 8 pcs Retaining Rods H J K 28 pairs Slip-Sleeves Plastic cap (top) Threaded end (bottom) E 7 pcs Shelves I 4 pcs Threaded Inserts 4 pcs Plastic Caps 8 pcs Clips 4 pairs Pole Clamps Step 3: Starting from the bottom, fasten a pair of Slip-Sleeves (D) around the groove of each pole.