Instructions / Assembly

Slide the shelf(D)over the top of the 4 poles until it

rests snugly over the sleeves. Repeat for 6 other shelves(D).

Tip :If necessary ,use a rubber mallet to further secure

the shelf.

Step 4

Starting at the bottom,fasten a pair of slip sleeves(B)

around the groove of each pole. If necessary ,move the

sleeves slightly up or down until it "snaps"into place.

Step 3

Screw the wheels(C)into the bottom end of each pole.

Step 2

Screw the top and bottom pole(A)together.

Step 1

6 pcs6 pcs12 pcs

Bin labels

F-36 pcs

Storage Bins

E-24 pcs

Shelves

D-8 pcs

Wheels

C-2 pair

Slip Sleeves

B-33 pairs

Poles

A-4 pcs

#16508

ASSEMBLY INSTRUCTION-BIN RACK

Dividers

G-10 pcs

PAGE 1
ASSEMBLY INSTRUCTION-BIN RACK #16508 A-4 pcs Poles B-33 pairs Slip Sleeves E-24 pcs Storage Bins 12 pcs 6 pcs C-2 pair Wheels D-8 pcs Shelves F-36 pcs Bin labels G-10 pcs Dividers 6 pcs Step 1 Screw the top and bottom pole(A)together. 1 Step 2 Screw the wheels(C)into the bottom end of each pole. 2 Step 3 Starting at the bottom,fasten a pair of slip sleeves(B) around the groove of each pole. If necessary ,move the sleeves slightly up or down until it "snaps"into place.
PAGE 2
Step 5 Fasten slip sleeves(B)around the groove at the top of the poles.Install the top shelf(D)over the top of the 4 poles. Slide the bins(E)onto the shelves. Put the divider(G) in the desired bins. Place the bin labels(F) in the label slot.