Use and Care Manual

Parts List
A. S.S. Top (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
1
B. Wire Shelf (1)
C. Slip Sleeves (16 )
D. Poles (4)
E. Leveling Feet (4)
2
Assembly Instrucons
STEP 1
Fit rubber caps on the
bottoms of the LEVELING
FEET (E), then screw the
feet into the bottom of
POLES (D).
STEP 2
Clip SLIP SLEEVES (C)
around the bottom grooves
of the POLES (D).
IMPORTANT: Count up
from bottom grooves to
make sure all slip sleeves
are positioned at the same
height to ensure a level
shelf.
Slide WIRE SHELF (B) over
slip sleeves and press down
firmly.
STEP 3
Clip SLIP SLEEVES (C)
around the top grooves on
each pole.
Fit TOP (A) over slip sleeves
and press down firmly.
Ensure a snug tight fit or
the table will not be
stable.
CONGRATULATIONS!
Enjoy your new stainless-
steel worktable!