Manual

Step 6:
Place a U-Sleeve (F) in the center of the
shelf truss. Install the Hanging Rod (G)
by tightening the Screw (H) through the u-
sleeve.
Step 7:
Identity the location on your closet wall to
mount the Wall Bracket (I) on the wall. It
is best to attach the wall brackets to wall
studs where possible (distance between
each stud is 16 inch). For attaching to a
wall stud, place the wall bracket against
the wall and drill three holes. Use
Screws (J) to attach the wall bracket, and
then screw the hanging rod to it.
For attaching to dry wall with no studs,
place the wall bracket against the wall and
drill three holes. Use Anchors & Screws
(J) to attach the wall bracket, and then
screw the hanging rod to it.
Closet Room Organizer Weight Capacity:
Shelves 100 lbs/ea
Expandable Hanging Rod (not extended) 125 lbs/ea
Expandable Hanging Rod (fully extended) 50 lbs/ea
TF130531
CLOSET ROOM ORGANIZER
Model No. 05811
ASSEMBLY INSTRUCTIONS
Customer Service
Tel [phone]
Tel [phone]
Fax [phone]
Monday through Friday 8:30 am - 4:30 pm (Pacific Time)
Seville Classics, Inc.
Torrance, CA 90501 USA
www.sevilleclassics.com
Please read and save these instructions
©2013 Seville Classics, Inc.