Manual

Please make sure you have all the parts before assembly
A
4 pcs
B
4 pcs
C
20 pairs
D
4 pcs
Top Pole
Bottom Pole
Slip Sleeve
Leveling Foot
plastic cap (top)
threaded end (bottom)
E
5 pcs
F
2 pcs
G
2 pcs
H
2 pcs
Shelf
U-Sleeve
Hanging Rod
Screw
I
2 pcs
J
6 sets
Assembly Tool Required
Wall Bracket
Anchor & Screw
Phillips Screwdriver
Step 1:
Screw Leveling Feet (D) into Bottom
Poles (B).
Step 2:
Starting from the bottom, fasten 4 pairs of
Slip Sleeves (C) around the grooves of the
4 bottom poles. If necessary, move the
sleeves slightly up or down until they snap
into position.
Step 3:
Slide a Shelf (E) over the top of the 4
bottom poles until it rests snugly over the
slip sleeves. Repeat steps 2 and 3 by
attaching 4 more pairs of slip sleeves and
another shelf at the desired height.
Note: The poles have double grooves every
5 inches for easy assembly.
Step 4:
Screw Top Poles (A) to bottom poles.
Step 5:
Repeat steps 2 and 3 by attaching 12 more
pairs of slip sleeves and 3 more shelves at
the desired heights.