ASSEMBLY INSTRUCTIONS Storage Cabinet (Model No. 16241) 48" W X 24" D X 72" H (1.21 m x 60.9 cm x 1.83 m) REV.
(pg 1 of 11)
(pg 2 of 11) (#1-A) Left Side Panel (#2-A) Right Side Panel (#6-A) Left Door (#7-A) Right Door
PARTS LIST (pg 3 of 11) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department. (please refer to page 11 of 11) .
PARTS LIST (pg 4 of 11) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department. (please refer to page 11 of 11) .
PARTS LIST (pg 5 of 11) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department. (please refer to page 11 of 11) .
PARTS LIST (pg 6 of 11) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department. (please refer to page 11 of 11) .
ASSEMBLY INSTRUCTIONS (pg 7 of 11) Storage Cabinet (Model No. 16241) WARNING: Some parts may have sharp edges. To avoid injury, wearing gloves is recommended during assembly. Step 1: Install (#1-A) Left Side Panel.
ASSEMBLY INSTRUCTIONS (pg 8 of 11) Storage Cabinet (Model No. 16241) Step 4: Install (#7-A) Right Door. Repeat Step 3, use (#7-A1) Right Door - Upper Panel, (#7-A2) Right Door - Bottom Panel, (#6-A3) Door Panel Connection Part, use 1pc (#41) Screw F to tighten the touching sides, use 4pcs (#41) Screw F to tighten from the the top touching side, and 4pcs (#52) Screw K to tighten from outside edge. Note: Make sure the (#7-A1) Right Door - Upper Panel is flushed with (#7-A2) Right Door - Bottom Panel.
ASSEMBLY INSTRUCTIONS (pg 9 of 11) Storage Cabinet (Model No. 16241) Step 8: Install (#8, #9 and #10) Back Panels. 1). Attach (#10) Bottom Back Panel onto both Bottom of Left and Right Side Panels (#1-A2 and #2A2) and Bottom Panel (#4), line up screw holes, use 15pcs (#41) Screw F to tighten. 2). Attach both (#9) Middle Back Panel above (#10) Bottom Back Panel the same way. Place the groove of the (#9) Middle Back Panel onto the top edge of the (#10) Bottom Back Panel, use 18pcs (#41) Screw F to tighten.
ASSEMBLY INSTRUCTIONS (pg 10 of 11) Storage Cabinet (Model No. 16241) Step 11: Install (#23) Magnet. Place (#23) Magnet onto (#3) Top Panel and (#4) Bottom Panel facing the front, use 4pcs (#41) Screw F to tighten. Step 12: Install (#6-A, #7-A) Left and Right Doors. 1). Attach (#6-A) Left Door to (#1-A) Left Side Panel, use 11pcs (#41) Screw F to tighten. Note: The screw holes on the door hinge have tolerance, enabling the door to be adjusted and centered in the door frame.
CONTACT INFORMATION (pg 11 of 11) *If you are missing any parts, have any questions, or need additional assistance in assembly, please contact our bilingual (English/Spanish) customer service department at: Seville Classics, Inc. 19401 South Harborgate Way Torrance, CA 90501 USA Telephone: (800) 323-5565 within USA Hours: 9:00am - 4:30pm (Pacific Standard Time) Fax: (310) 533-3899 E-mail: support@sevilleclassics.com Website & Online Store: www.sevilleclassics.
UltraHD Line Model No. 20206 UltraHD Workbench Model No. 20209 UltraHD Wall Cabinet Model No. 20242 UltraHD Rolling Workbench Model No. 20247 UltraHD Lighted Workcenter Model No. 20215 UltraHD Trash Bin Model No.