Instructions / Assembly

Step 9:
Step 10:
1).
2). Install (#19-2) Drawer Base Panel
Note:
Install Wheels (#11 and #13)
As shown in the picture, assemble (#67) Handle
and (#14) Drawer Handle Bracket, line up the screw
holes, use 2pcs (#61) Screw O (M4 x 12L) to tighten.
Repeat the above steps to assemble the other
drawer.
4). Install (#67) Handle and (#14) Drawer Handle
Bracket
Note:
Tighten all screws after adjusting the drawer on
same level.
Install (#20-1) Small Drawer Front Panel,
(#20-3) Small Drawer Left Panel,(#20-4) Small
Drawer Right Panel
According to the Sticker Instructions, line up the
screw holes, then attach (#20-3) Small Drawer Left
Panel, (#20-4) Small Drawer Right Panel to (#20-1)
Small Drawer Front Panel, use 4pcs (#15) Screw B
(M4 x 8L) to tighten.
In order to adjust when assembling, please don't
tighten all screws completely at the beginning, each
screw will be tightened after the debugging is
completed.
Install (#20) Small Drawers
Attach 2pcs (#11) 3"X2" Caster With Brake to
two front legs, 2pcs (#13) 3"X2" Caster W/O
Brake to two back legs, use (#25) Wrench to
tighten them.
Optional Leveling feet may also be purchased at
www.sevilleclassics.com. Model#: WEB086
Take out (#20-5) Small Drawer Back Panel, line up
the screw holes, attach (#20-5) Small Drawer Back
Panel to (#19-2) Drawer Base Panel and (#20-3)
Small Drawer Left Panel, (#20-4) Small Drawer
Right Panel, use 7pcs (#15) Screw B (M4 x 8L) to
tighten.
3).Install (#20-5) Small Drawer Back Panel
Take out (#19-2) Drawer Base Panel, according to
the Sticker Instructions, line up the screw holes,
attach (#19-2) Drawer Base Panel to (#20-3) Small
Drawer Left Panel,(#20-4) Small Drawer Right Panel
and (#20-1) Small Drawer Front Panel, use 9pcs
(#15) Screw B (M4 x 8L) to tighten.
9
Workcenter Island (Model No. UHD20109)
*NOTE: We recommend TWO people to assemble the workcenter.*