Instructions / Assembly

Step 11:

Note:

Step 12:

Install (#20) Small Drawers into Workcenter

1). Pull out the side rails of the drawer bracket, all the

way to the front.

After pulling out each rail, make sure all the ball

bearings of the rail are visible and pointing

completely outward to the front.

2). Line up the inner rails on both the Small Drawer

Left Panel and Right Panel to the fully assembled

drawer, drag drawer with both hands and push the

drawer slowly at the same time to lock in place.

Repeat Step 11 for second drawer Installation.

Place Drawer Mat (#18) into Drawers

Pull out (#20) Small Drawers, place mat (#18) in

each drawer.

Pull the railing all

the way out.

Workcenter Island (Model No. UHD20109)

*NOTE: We recommend TWO people to assemble the workcenter.*