Instructions / Assembly

Step 3:

Note:

Step 4:

Step 5:

Install (#48-2) Small Drawer Left Support and (#48-3)

Small Drawer Right Support

As shown in the picture, attach (#48-2) Small Drawer Left

Support between (#7) Left-Front Leg and (#8) Left-Back Leg,

use 7pcs (#50) Screw I (M6X15L) to tighten.

Attach (#48-3) Small Drawer Right Support between (#9)

Right-Front Leg and (#10) Right-Back Leg, use 7pcs (#50)

Screw I (M6X15L) to tighten.

Tighten all the screws in this step.

Install (#4) Side Pegboard Panel and (#2) Back Panel

1). Attach 2pcs (#4) Side Pegboard Panel between Front Leg

and Back Leg, use 8pcs (#61) Screw O (M4 x 12L) to tighten

on Small Drawer Left Support and Small Drawer Right

Support.

2). Attach (#2) Back Panel between 2pcs Back Leg, use 5pcs

(#61) Screw O (M4 x 12L) to tighten.

Install (#48-1) Small Drawer Middle Support

Attach (#48-1) Small Drawer Middle Support to (#1) Solid

Hardwood Board Top according to the Sticker Instructions,

use 8pcs (#50) Screw I (M6X15L) to tighten.

Workcenter Island (Model No. UHD20109)

*NOTE: We recommend TWO people to assemble the workcenter.*