Instructions / Assembly

Step 6:

Note:

Step 7:

Step 8:

Install (#6) Back-Bottom Crossbar

Attach (#6) Back-Bottom Crossbar to Back Legs, line up

the screw holes, use 4pcs (#50) Screw I (M6X15L) and 4pcs

(#59) M6 Lock Washer to tighten.

Install (#3) Bottom Shelf

Install (#5) Front-Bottom Crossbar

1. Please use TWO people for Bottom Shelf Installation

2. Do not fully tighten the screws.

3. Additional Bottom Shelf (#3) may be purchased

separately at SevilleClassics.com, Model#: UHD20109S,

to install at Pre-Drilled screw holes on each leg

indicated in the image, by simply removing those pre-

installed screws.

As shown in the picture, attach (#3) Bottom Shelf to 4

Legs, line up the screw holes, use 6pcs (#61) Screw O (M4 x

12L) to tighten, 2pcs for two Front Legs, 4pcs for two Back

Legs.

As shown in the picture, attach (#5) Front-Bottom Crossbar

on the back side of two Front Legs, line up the screw holes,

use 2pcs (#50) Screw I (M6X15L) and 2pcs (#59) M6 Lock

Washer to tighten. Use 2pcs (#61) Screw O (M4X12L)

tighten on the inner side of two Front Legs, then tighten all

screws including those in Step 6 at the same time.

Front

Back

Front

Back

Front

Workcenter Island (Model No. UHD20109)

*NOTE: We recommend TWO people to assemble the workcenter.*

Used for

additional

Shelf.