ASSEMBLY INSTRUCTIONS Ultra Heavy Duty Work Bench (Model #20206) (72" W X 25" D X 37.
(pg 1 of 5) #3 #7 #4 #2 #5 #2 #5 #6 #1
PARTS LIST (pg 2 of 5) Please check the parts carefully according to the parts list. If you are missing any parts, please call our customer service department (please refer to page 5 of 5) to send you the missing parts.
ASSEMBLY INSTRUCTIONS (pg 3 of 5) *NOTE: We recommend using TWO people to assemble the work bench. Step 1: Open color box and remove the parts that are on top of the inner carboard box. Step 2: Unfold the inner box. Remove the Styrofoam and expose the screw holes of the wood board Step 3: Place the two top crossbar (#2) on the wood board and line up the screw holes, keeping in mind that the screw holes for the legs must face the inside of the board.
ASSEMBLY INSTRUCTIONS (pg 4 of 5) *NOTE: We recommend using TWO people to assemble the work bench. Step 5: Fit the bottom crossbar (#1) onto the legs. Step 6: Use the wrench (#8) provided to screw in all the screws (#4, #7). 4 8 7 Step 7: Screw in the leveling feet (#6) all the way, using the wrench. Step 8: Examine all screws to make sure they are tightly fastened and finally, stand up the work bench.
(pg 5 of 5) *If you are missing any parts or have any questions or need additional assistance in assembly, please contact our customer service department at: Seville Classics, Inc. 19401 South Harborgate Way Torrance, CA 90501 USA Telephone: (800) 323-5565 within USA Hours: 9:00am - 4:30pm (PST) Fax: (310) 533-3899 E-mail: support@sevilleclassics.com Website & Online Store: www.sevilleclassics.
