ASSEMBLY INSTRUCTIONS 24” x 24” Pegboard Set (Model No.20226) (24” x 24”, Pegboard Size) (48” W x 8.
Parts List (pg. 2 of 5) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department (please refer to page 5 of 5).
Parts List (pg. 3 of 5) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department (please refer to page 5 of 5).
(pg. 4 of 5) Step 1: 8 Peel and Stick the Spacers (#12) (top protective layer must be peeled off to expose the adhesive) onto the BACK of the pegboards where the Screws (#11) will attach to the wall. See image below. Step 2: Place the pegboard at desired location on the wall and mark the locations to drill holes. Each pegboard needs 4 pcs. of Screws (#11) and Plastic Anchors (#10). Install ONE pegboard at a time to assure level.
(pg. 5 of 5) *If you are missing any parts, have any questions or need additional assistance with assembly, please contact our bilingual (English & Spanish) Customer Service Department at: ***Please visit our website or call and inquire about our additional UltraHD Line*** Model No. 20206 Model No. 20242 UltraHD Workbench UltraHD Rolling Workbench Model No. 16234 UltraHD Rolling Cabinet Model No. 20205 UltraHD Rolling Drawer Cabinet Model No.
