ASSEMBLY INSTRUCTIONS UltraHD Rolling Workbench Cabinet (Model No. 20242) 77" X 20" X 37.5" (1.95m x 50.8cm x 95.2cm) REV.
(pg 1 of 14) Small Drawer Medium -size Drawer Large Drawer
(pg 2 of 14) Medium-size Drawer #12-1 #12-2 #12-5 #15 Large Drawer #13-1 #13-2 #13-4 #15 Small Drawer #26-1 #26-2 #15
PARTS LIST (pg 3 of 14) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department (please refer to page 14 of 14).
PARTS LIST (pg 4 of 14) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department (please refer to page 14 of 14).
PARTS LIST (pg 5 of 14) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department (please refer to page 14 of 14).
PARTS LIST (pg 6 of 14) Please check the parts carefully according to the parts list. If you are missing any parts, please contact our customer service department (please refer to page 14 of 14).
UltraHD Rolling Workbench Cabinet (Model No. 20242) (pg 7 of 14) Step 1. Open both boxes, locate and remove the cardboard box containing the (#8) Solid Hardwood Top, and place the other parts to the side. Step 2. Install Back Frame (#4) to Solid Hardwood Board (#8). [ Use the (#25) Wrench for this step ] Open the cardboard box containing the (#8) Solid Hardwood Top. Assemble on top of the cardboard to avoid scratching the wood top.
UltraHD Rolling Workbench Cabinet (Model No. 20242) Step 4. Remove 3 Slides to create the space needed to use (#24) Screwdriver. (pg 8 of 14) Install the (#11) Medium Size & Large Drawer Slider Support . [Use (#15) Screw B & (#21) Screwdriver for this step]. Attach (#11) Medium Size & Large Drawer Slider Support to the (#4) Back Frame, making sure the "Top" of Medium Size & Large Drawer Slider Support is close to the (#8) Solid Hardwood Top.
UItraHD Rolling Workbench Cabinet (Model No. 20242) (pg 9 of 14 ) Step 8. Fasten the 3 slides back onto the (#2) Right Side Panel Step 9. [Use (#15) Screw B for this step] Attach the (#5) Base Panel to the rest of the unit. that you removed in step 6. Step10. Install (#12-B & #13-B) Wheels. Use (#17) Screw D for this step] Attach (#12-B & #13-B) Wheels. Make sure that the (#13-B) Fixed Wheels w/o Brakes are on the same end (right or left side) of the Work Bench.
UItraHD Rolling Workbench Cabinet (Model No. 20242) (pg 10 of 14) Step 13. lnstall (#12-2) Medium-size Drawer Bottom and (#12-5) Medium-size Drawer Back Panel. [Use (#15) Screw B for this step]. 1. Fold the Left and Right panel up. 2. Attach the back panel to the folded drawer panel, use 7pcs (#15) Screw B to tighten. #12-2 #12-5 Note: Do not tighten the screws all the way, until step 14 is completed. #15 Step 14. lnstall (#12-1) Medium-size Drawer Front. [Use (#15) Screw B for this step].
UltraHD Rolling Workbench Cabinet (Model No. 20242) (pg 11 of 14) #26-2 #26-2 Step 15. Install Small Drawer Front (#26-1) to Small Drawer Body (#26-2). 1. Fold (#26-2) Small Drawer Body left Panel and right panel, and back panel up. 2. After fold up each panels of (#26-2) Small Drawer Body, use (#15) Screw B to tighten the back panel to the Left and right panel. Note: Do not tighten the screws all the way, until part 3 is completed. #15 3.
UltraHD Rolling Workbench Cabinet (Model No. 20242) (pg 12 of 14) Step 16. Place the Drawers. 1. Pull out the sliders completely, then put the drawer to the sliders, make sure the square holes on the drawer side panels are line up, and the drawer is hook on the sliders completely. 2. Use 4pcs (#15) Screw B to tigthen the drawer, and put (#24) Drawer Mat into the drawer. Repeat above steps to place other drawers.
UltraHD Rolling Workbench Cabinet (Model No. 20242) (pg 13 of 14) Step 17. Install the stainless steel (#7) Door. [Use (#15) Screw B for this step] Attach the stainless steel Door (#7) to the unit. Note that the screw holes on the door hinge have tolerance, enabling the door to be adjusted and centered in the door frame. Step 18. Install the (#6) Shelf. Place the Shelf (#6) in the unit at the desired height and ensure that all four corners are secured on the hooks on the front and back frame.
(pg 14 of 14) *If you are missing any parts, have any questions, or need additional assistance in assembly, please contact our bilingual (English/Spanish) customer service department at: Seville Classics, Inc. 19401 South Harborgate Way Torrance, CA 90501 USA Telephone: (800) 323-5565 within USA Hours: 9:00am - 4:30pm (Pacific Standard Time) Fax: (310) 533-3899 E-mail: support@sevilleclassics.com Website & Online Store: www.sevilleclassics.
UltraHD Line Model No. 20206 UltraHD Workbench Model No. 20207 UltraHD Rolling Cabinet Model No. 20209 UltraHD Wall Cabinet Model No. 20247 UltraHD Lighted Workcenter Model No. 20215 UltraHD Trash Bin Model No.