ASSEMBLY INSTRUCTIONS UltraHD Storage Hook Set(Model No.
#09 #10 #11 #01 #08 #07 #02 pg 1 of 7 #05 #03 #06 #04
PARTS LIST #01 Rail (29617T)-2pcs #04 Double Utility Hook (29595)-2pcs #08 Plastic Connector-1pc #02 Saddle Hook (29602)-1pc #05 #06 Closed Hook (29598)-1pc #09 J-Hook (29606)-1pc #10 End Cap-2sets Screw (M5*40mmL)-16pcs pg 2 of 7 #03 Double S-Hook (29603)-1pc #07 Universal Hook (29600)-1pc #11 Plastic Anchor-16pcs
UltraHD Storage Hook Set(Model No. 20259) Step 1 - Option A Mount on a Brick Wall #01 #10 pg 3 of 7 #11 Decide where to hang the rail. Use a measuring tape and level to mark the height. Find your position. Punch each hole with a power drill (5.5mm bit) and hammer the plastic anchor (#11) into the hole. Insert screws (#10) into plastic anchors and securely fasten the rail.
UltraHD Storage Hook Set(Model No. 20259) stud Step 1 - Option B Plaster Board with Stud 16” 16” #01 16” 16” #10 or 16” 16” Note: when you start to fasten the rail，please flush the rail end with the first stud center pg 4 of 7 Decide where to hang the rail. Start from one side of the desired location to find the first stud.Locate the second stud 16” from either side of the first stud. Note that the distance between two studs is normally 16” (center to center).
UltraHD Storage Hook Set(Model No. 20259) step 2 #08 After the first rail is installed, insert the connector (#8) to link both rails. Refer to step 1 to mount the second rail. #09 #09 step 3 Cover the end of each rail by inserting an end cap (#9).
UltraHD Storage Hook Set(Model No. 20259) step 4 #07 pg 6 of 7 Hang the hooks on the rails.
Seville Classics Inc. 19401 S. Harborgate Way Torrance, CA 90501 USA Telephone: (800) 323-5565 within USA Hours: 9:00am - 4:30pm (Pacific Standard Time) Fax: (310) 533-3899 E-mail: support@sevilleclassics.com Website & Online Store: www.sevilleclassics.
