Full Product Manual

STEP 2.
Insert HEX SCREW (N) through center of CROSSBARS (D) into top and boom ends
of MIDDLE FRAME (C) poles.
Tighten with HEX KEY (K).
Repeat for all CROSSBARS (D).
STEP 3.
Aach LEFT, RIGHT FRAMES (A,B) to CROSSBARS (D) with HEX SCREWS (N).
MAKE SURE to t WASHERS (J) between
crossbar ends and frames.
Insert at side of washer into crossbar end.
Curved side of washer MUST face frames.
Press LOCKING CASTERS (L) and CASTERS (M) into the sleeves installed in STEP 1.
Tighten all HEX SCREWS (N) with HEX KEY (K).