Thank you for purchasing our Studio Designs, Inc. Gracias por comprar nuestro mueble Studio Designs, Inc. Merci d’avoir acheté un meuble Studio Designs, Inc. PRO STITCH SEWING TABLE #13381 Silver/White • Plateado/Blanco • Argenté/Blanc #13382 White/Concrete • Blanco/Concreto • Blanc/Béton Office: 562.942.0492 Product Support Line: 866.942.0492 www.studiodesigns.com Rev. 11.6.
ASSEMBLY INSTRUCTIONS - IMPORTANT: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. Do not use power tools to assemble. A Phillips screwdriver may be required for assembly. If you require any assistance with assembly, parts, or information on other products, please visit our website: www.studiodesigns.com or call us.
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION 1. Left Leg QTY / CANT/ QTÉ PICTURE / DIBUJO / IMAGE 1 Pata Izquierda Jambe Gauche 2. Center Leg 1 Pata Central Jambe Centrale 3. Right Leg 1 Pata Derecha Jambe Droite 4. Top Bar 1 Barra Superior Barre Supérieure 5. Rear Panel 1 Panel Trasero Panneau Arrière 6. Bottom Shelf 1 Estante Inferior Étagère Inférieure Pro Stitch Sewing Table p.
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QTY / CANT/ QTÉ 7. Right Shelf Estante Derecho Étagère Droite 1 8. Top Mesa Table 1 9. Side Shelf Estante Lateral Étagère Latérale 1 10. Left Bracket Soporte Izquierdo Support Gauche 1 11. Right Bracket Soporte Derecho Support Droite 1 12. Platform Support Soporte para Plataforma Support de Plateforme 2 13. Sewing Platform Plataforma de Costura Plate-forme de Couture 1 14.
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QTY / CANT/ QTÉ 16. Plastic Cover Tapa en Plástico Couverture en Plastique 1 17. Cam Bolt Tornillo de Leva Vis à Came 4 18. Cam Lock Cerradura de Leva Serrure à Came 4 19. Shelf Hitch Enganche de Estante Pince d’étagère 2 20. Hinge Bisagra Charnière 2 21. Allen Bolt - 1/4" x 1-3/4" Perno Allen - 6mm x 45mm Boulon Allen - 6mm x 45mm 2 22.
1 27 20 27 19 9 27 19 27 20 8 Pro Stitch Sewing Table p.
2 Please note the direction of slots in Left and Right Brackets (10 and 11). Tenga en cuenta la dirección de las ranuras en el Soporte Izquierdo y Derecho (10 y 11). 24 Notez la direction des fentes dans les Supports Gauche et Droit (10 et 11). 24 10 24 11 24 24 12 24 12 13 Install Supports (12), then set Platform (13) aside until later step. Instale Soportes (12), luego aparte la Plataforma (13) hasta un paso más tardío.
3 15 Support bar faces out - see arrow. Barra de soporte hacia afuera - vea la flecha. Barre de support face à l’extérieur - voir le flèche. 1 15 22 21 22 Hole faces up. Agujero hacia arriba. Trou vers le haut. Pro Stitch Sewing Table 4 p.
4 Do not tighten Bolts (22). No apriete los Pernos (22). Ne pas serrer les Boulons (22). 15 17 2 15 17 22 17 Insert into the hitch. Inserte en el enganche. Insérer dans le pince. 22 Pro Stitch Sewing Table p.
5 Do not tighten Screws (26). No apriete los Tornillos (26). Ne pas serrer les Vis (26). Holes face up. Agujeros hacia arriba. Trous vers le haut. 18 18 6 26 22 21 Pro Stitch Sewing Table p.
6 Install Rear Panel (5), then tighten both Screws (26) from step 5, and Bolts (22) from step 4. Installe Panel Trasero (5), luego apriete ambos Tornillos (26) del paso 5, y Pernos (22) del paso 4. Installer le Panneau Arrière (5), puis serrer les deux Vis (26) de l’étape 5, et Boulons (22) de létape 4. 26 Holes face rear. Agujeros hacia atras. Trous vers l’arrière. 26 5 26 26 22 22 Pro Stitch Sewing Table p.
7 Slide Shelf (7) over the Cam Bolts (20), and secure using Allen Screws (26). Make sure arrow on Cam Lock (18) faces Bolt, then turn until secure (do not overtighten). Deslice el Estante (7) sobre los Pernos (20), y fije usando Tornillos Allen (26). Asegúrese que la flecha en la Cerradura (18) de hacia el Perno, luego atornille hasta que quede firme (no apriete demasiado). Glisser l’étagère (7) sur Boulons (20), et fixer à l’aide des Vis Allen (26).
8 22 22 Make sure all Bolts and Screws from steps 1-8 are tight. Asegúrese de que todos los Pernos y Tornillos de los pasos 1-8 esten apretados. Assurez-vous que tous les Boulons et les Vis des étapes 1-8 sont serrés. Pro Stitch Sewing Table p.
9 Caution: Use two people. Precaución: Use dos personas. Précaution: Utilisez deux personnes. 16 25 25 Pro Stitch Sewing Table 13 p.
10 23 14 Insert one Drawer (14) into top rails, and secure using one Allen Bolt (23). Repeat for middle and bottom Drawers. Inserte una Gaveta (14) en los rieles superiores y asegúrela con un Perno Allen (23). Repita el paso para la Gaveta de en medio e inferior. Insérez un Tiroir (14) dans les rails supérieurs et fixez-le avec un Boulon Allen (23). Répétez l’étape pour les Tiroirs du milieu et inférieure. Pro Stitch Sewing Table p.
LIMITED WARRANTY Studio Designs (the “Company”) warrants to the original purchaser that this product will be free from defects in its workmanship and materials, under normal residential use and service conditions, as described herein.