User manual

PAL/NTS Switches:
Switch 1
Switch 2
Switch 3
TV Standard
ON
ON
ON
NTSC-M (North America)
OFF
ON
ON
NTSC-EIAJ (Japan)
ON
OFF
ON
PAL-M (Brasil)
OFF
OFF
ON
PAL-N (South America)
ON
ON
OFF
PAL-BDGHI (Europe)
OFF
OFF
OFF
PAL-Combination N
Troubleshooting:
No Video: Check that all the cables are properly connected, to the computer and to
the TV and that the TV is set to the correct input. Also ensure that your computer is
outputting a compatible signal (1024 x 768 60Hz recommended) On a laptop computer
you may need to use a Fn keyboard combination to output video
No Audio: Make sure that the cables are connected properly and that you are
connecting to your computer’s speaker or headphone output. (Usually green) Make sure
that the volume is not muted in the computer settings.
Scrolling image: If the image is scrolling on your TV, check the NTSC/PAL setting
is appropriate to your area and video equipment. Also check that you are using a
compatible resolution. 800 x 600 or 1024 x 768
Sewell Development Corporation
To see this and other AV products online, visit:
SewellDirect.com
Part Number: SW-23000
801-356-3823
[e-mail]