User's Manual

Reference
Design Document for
Slim RU Version 1.2
User Manual
Revision IR Page 3 / 25
1. Introduction
It is monitor and controls all the functions of Slim-RU series based on graphic user interface
(GUI) or Man Machine Interface (MMI).
Slim-RU GUI program offers straight forward user interface under Windows 2000 or Windows
XP operating system. Therefore it needs only short training course for maintenance
technicians.
Also MMI program performs all functions of GUI. But it has extra commands for detail such as
test purpose command set.
This manual covers all type of Slim-RU series, e.g. totally independent for the series. All
functions described in this document are same. Only operating frequency is different from each
model like bellows.
Models Tx Frequency
STS800-43HM-D
869~ 894MHz
STS1900-43HM-AAD
1930~1950MHz
STS1900-43HM-ABDE
1945~1970MHz
STS1900-43HM-DEFC
1965~1990MHz
* NOTE 1: Before run GUI or MMI program, PC or laptop computer should connect to Slim-
RU with RJ-45 cable.
* NOTE 2: When the cable connects Master Slim-RU, you can handle all Slim-RUs such as
master, slave1, and slave2. But if you connect it to slave 1 or slave 2, you can
handle only it.