User`s manual

FlexWATCH User Manual Part 3
4029 12 INTPLUS
effect and the current connection to FlexWATCH® Server’s Web Page will be disconnected.
Therefore, you need to re-login with new Password.
2.4. Access permission
You can set up user accounts for the access to FlexWATCH® Server.
Access Permission Menu
Full Access
To allow system access by anyone who knows the IP address. PTZ, Audio and
Relay output device can be controlled by anyone. Thus, if security for video is
important, it is highly recommended to user limited access mode below
Limited Access
To limit server access to the authorized user only. Through this mode, you can
create multi level access accounts for each camera, not system level, with
different control authority. Once Limited Access option is selected, User
registration should be followed to effectively use Limited Access function.
Maximum Frame
Rate
Available display rate for each channel of the FlexWATCH server. You can
choose among 30,15,10,5,2 and 1. Frame rate for the display will be based on
the chosen number. This function is only for M-JPEG mode.
2.4.1. How to set Access permission
1. Click “Access Control” of System Configuration group.
2. Please select either Full Access or Limited Access.