User`s manual

FlexWATCH User Manual Part 3
4029 24 INTPLUS
3. Network Configuration
You can do general network configuration for FlexWATCH® Server and can check current setting
values. Network configuration mode provides interface for the server to be connected to broadband network
or PSTN line. In addition to basic network, application port such as HTTP, NVCP, Voice port configuration
and IP filtering options are provided.
3.1. Network Configuration
You can configure the network settings in accordance with your network services such as Static IP,
DHCP Client, PPPoE, etc. LAN port must be used for network configuration. You can consult ISP for more
information.
1. Static IP: you can use this configuration if you have a static IP address for a FlexWATCH
server.
2. DHCP Client: you can use this configuration if you use DHCP service. For example, most
ISPs’ services (Cable modem or ADSL, VDSL) are DHCP type, under which you are
assigned IP address automatically.
3. PPPoE: Some DSL or Cable Modem based ISP provides PPPoE based internet connection
service. If FlexWATCH server must directly be connected to the external DSL or Cable
modem, PPPoE option must be enabled. You need to enter ID & Password to connect to the
Internet.
3.1.1. Static IP Configuration
1. Please click “Network Configuration” of Network Configuration group.
2. If you select Static IP, then you will be able to enter IP Address, Netmask, Gateway, DNS1,
and DNS2.