User`s manual

M4029-08 27 Seyeon Tech Co., Ltd
First, select Enable to use the feature. Then enter the address of the SMTP server which is needed
for email service. If your SMTP server requires a user ID and a password for authentication, you will
have to get them from ISP or network admin. Enter the ID and password.
In Sender field, enter your email address or other meaningful words that will show the message was
sent from the FlexWATCH server as a notification. Now enter the email addresses of the recipients in
the Recipient fields, up to 3 persons. In the User-Defined Message box, you may put a message
to explain why the message was sent. After finishing the setup, click Apply to save settings.
4.7. IP-CCTV DNS Setup
IP- CCTV DNS service provides a static & public domain name to help users access FlexWATCH
products even though their IP address is changed or they are used in local network. For proper
function of IP-CCTV DNS service, products should be accessible through internet.
To use IP-CCTV DNS, users have to create ID from IP-CCTV DNS server(http://www.ipcctvdns.com)
and register FlexWATCH products with MAC address and Product Key. Those information can be
Mail Notification
Enable: Send email
Disable: Do not send email
SMTP Server SMTP Server address for email service
Authentication Login
Enable: user ID and password are required for SMTP
server
Disable: user ID and password are not required
User ID User ID for SMTP server
Password Password for SMTP server
Sender Email address of Sender
1st / 2nd / 3rd Recipient Email Addresses of the Recipients (up to 3 persons)
User Defined Message Message to be included in the Notification email