User`s manual

FW2170 User’s Manual
M4067-00 12 Seyeon Tech Co., Ltd
2. Hardware Description
2.1. Front View
Picture 2 : FW2170 Front View
Name
Description
A
LAN LINK LED
Green light blinks when LAN is physically connected
B
Power LED
Red light blinks when power is provided
C
Factory Default
Button
This button can reset the factory default settings at the system.
Keep pressing FD button for about 5 seconds, after reboot the system. While pressing
this button, ACT LED is flickering.
D
CONTROL
CTL Port (RS-485, RS-232, DI, DO)
E
Display Mode
Switch
This button changes Display Mode. As you press the button, the Display Mode will be
changed one by one from Channel 1 to Channel 4. If you press the button for 2 sec., you
can apply Rotation Mode directly.
Table 3 : FW2170 Front View
D
E
A
B
C