User`s manual

FW2170 User’s Manual
M4067-00 19 Seyeon Tech Co., Ltd
5.1. Server Name Setup
Click Step 1 on Quick Configuration, then the following will be displayed and you will find out the
system information such as model name of the FlexWATCH™ Server, server name, MAC address (serial
number), firmware version, and Web image version.
As an administrator, you can change the name of the server name, but other values are not allowed to
change. To change the server name, enter a new server name in the Server Name filed. You may use up to
21 alphanumeric or up to 10 Unicode characters. Tab or any other special characters are not allowed. Click
“Apply” button to save the setting and it will take effect immediately.
5.2. Admin Password
To change the password for the administrator, click Admin Password on System Configuration menu.
Default ID for admin account is fixed as “root” and not allowed to change. In Old Password field,
enter the current password. In both New Password and Confirm Password fields, enter the same new
password. The password must be between 4 and 23 alphanumeric letters. Click “Apply” button to put it into
effect.
Because you have replaced the password with a new one, the existing network connection made with
old password to FlexWATCH™ Server is lost now. You will have to reconnect to the FlexWATCH™ server
using new password.